--- title: "Using a Linux System" slug: "using-a-linux-system-7" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/using-a-linux-system-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Using a Linux System You can use a serial cable or a USB-to-serial cable to connect the Linux machine to the serial port of the appliance. Trellix uses Prolific Technology Inc. adapters. ### Important The USB-to-serial cable is not provided with the appliance. To configure initial settings from a Linux system: 1. Connect the cable to the serial port of the appliance and to the Linux machine. 2. From a command prompt, establish a connection. If you are using a USB-to-serial cable, specify the COM port assigned to it. 3. When prompted, enter the default username (**admin**) and password (**admin**) for the administrator. 4. When prompted to change the password, configure a new password using the` username admin password <new password> `command. You will be logged out. Log in again with the new password. 5. You are asked to accept the End User License Agreement ([EULA](https://www.fireeye.com/company/legal.html)). Enter **y** to accept the terms of the agreement. 6. Enter **y** when you are prompted to use the Configuration Wizard for initial configuration. Then respond to the prompts as described in [Configuration wizard steps](/docs/configuration-wizard-steps). 7. After you answer the questions, the wizard summarizes your answers. To change an answer, enter the step number. Press **Enter** to save changes. :