--- title: "Using a Windows or Mac laptop" slug: "using-a-windows-or-mac-laptop-7" tags: ["Endpoint Security (HX)", "Product Usage"] updated: 2026-09-09T22:45:38Z published: 2026-09-09T22:45:38Z canonical: "docs.trellix.com/using-a-windows-or-mac-laptop-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Using a Windows or Mac laptop Because laptops do not usually have a serial port, you need a USB-to-serial cable to connect the laptop to the serial port (DB-9) of the appliance. Trellix uses Prolific Technology Inc. adapters. ### Important A null/serial cable or USB-to-serial adapter is not provided with the appliance. To configure initial settings from a Windows or Mac laptop: 1. Connect the serial cable (or USB-to-serial adapter) to the corresponding port in your laptop/workstation. 2. Connect the other end of the serial cable (or USB-to-serial adapter) to the serial port of the appliance. 3. Use a serial application (such as PuTTY) to establish a connection. Specify the COM port assigned to the USB-to-serial cable. 4. When prompted, enter the default username (**admin**) and password (**admin**) for the administrator. 5. When prompted to change the password, configure a new password using the` username admin password <new password> `command. You will be logged out. Log in again with the new password. 6. You are asked to accept the End User License Agreement ([EULA](https://www.fireeye.com/company/legal.html)). Enter **y** to accept the terms of the agreement. 7. Enter **y** when you are prompted to use the Configuration Wizard for initial configuration. Then respond to the prompts as described in [Configuration wizard steps](/docs/configuration-wizard-steps). 8. After you answer the questions, the wizard summarizes your answers. To change an answer, enter the step number. Press **Enter** to save changes. :