--- title: "Validating DTI access using the CLI" slug: "validating-dti-access-using-the-cli-4" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:11Z published: 2026-08-24T20:40:11Z canonical: "docs.trellix.com/validating-dti-access-using-the-cli-4" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Validating DTI access using the CLI Use the commands in this topic to verify DTI communication. **To validate DTI access:** 1. Go to CLI configuration mode. ``` hostname > enable hostname # configure terminal ``` 2. Check the status of the DTI service. (This example is from a managed appliance.) ``` hostname (config) # show fenet status Dynamic Threat Intelligence Service:    Update source  :    Enabled        : yes    Download       : DTIUser@10.11.121.13 : singleport    Upload         : DTIUser@10.11.121.13 : singleport    Mil            : DTIUser@10.11.121.13 : singleport ``` ``` HTTP Proxy:    Address        :    Username       :    User-agent     : ``` ``` Request Session:    Timeout        : 30    Retries        : 0    Speed Time     : 60    Max Time       : 14400    Rate Limit     :    Speed Limit     : 1 ``` ``` Dynamic Threat Intelligence Lockdown:    Enabled        : no    Locked         : no    Lock After     : 5 failed attempts ``` ```  UPDATES                      Enabled   Notify  Scheduled       Last Updated At                      -------   ------  --------------  ---------------  Security contents:  yes       no      every           2016/07/20 05:43:00  Stats contents   :  yes               none            2016/07/20 18:55:00 ``` 3. Confirm the following information: - Update source is online. - DTI service is enabled. - DTI service username is the name provided with DTI subscription license. - DTI service address is `cloud.fireeye.com`.