There are three ways to check that the Sensor is configured and available:
- On the Sensor, type status (For more information on the status command, see the CLI commands section in the Trellix Intrusion Prevention System Product Guide.)
- In the Manager Dashboard, check the System Faults status. (See if the Sensor is active. If the link is yellow, click on the cell to see the System Faults on the Sensor.)
- In the Manager, go to
Devices → <Admin Domain Name> → Devices → <Device Name> → Setup → Physical Ports. Look at the color of the button(s) representing the ports on the Sensor, and check the color legend on the screen to see the status of the Sensor's ports.
Note
If you have difficulty in troubleshooting the processes described above, refer to Trellix Intrusion Prevention System Product Guide. See Trellix Intrusion Prevention System Product Guide for a description of all available CLI commands.