--- title: "Verification of successful configuration" slug: "verification-of-successful-configuration" tags: ["Install and Get Started", "IPS 10.1.10"] updated: 2026-09-23T09:35:02Z published: 2026-09-23T09:35:02Z canonical: "docs.trellix.com/verification-of-successful-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verification of successful configuration There are three ways to check that the Sensor is configured and available: - On the **Sensor**, type status (For more information on the status command, see the CLI commands section in the Trellix Intrusion Prevention System Product Guide.) - In the Manager Dashboard, check the **System Faults** status. (See if the Sensor is active. If the link is yellow, click on the cell to see the System Faults on the Sensor.) - In the Manager, go to **Devices** → **** → **Devices** → **** → **Setup** → **Physical Ports**. Look at the color of the button(s) representing the ports on the Sensor, and check the color legend on the screen to see the status of the Sensor's ports. > [!NOTE] > Note > > If you have difficulty in troubleshooting the processes described above, refer to Trellix Intrusion Prevention System Product Guide. See Trellix Intrusion Prevention System Product Guide for a description of all available CLI commands.