--- title: "Verify successful installation" slug: "verify-successful-installation-3" tags: ["Hardware"] updated: 2026-09-17T10:17:59Z published: 2026-09-17T10:17:59Z canonical: "docs.trellix.com/verify-successful-installation-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify successful installation 1. Type `status` in the Sensor CLI. The status report appears. ![VerifySuricataSensor.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-9d042ac5-c812-0ce7-48db-d72794c04ae2.png?sv=2026-02-06&spr=https&st=2026-11-20T07%3A49%3A49Z&se=2026-11-20T08%3A49%3A49Z&sr=c&sp=r&sig=ANYthAtqQpmqSAMzUfWSHgL24NITtxWgDOiykrWSTg0%3D) The Sensor parameter `System Initialized` should be `yes`, and for Manager communication `Trust Established` should be `yes`. > [!WARNING] > Important > > When the Sensor starts, the status is uninitialized. You must manually import and deploy the ruleset to the NS9600 Suricata Sensor. Run the `downloadstatus` command to check the status. 2. From the Manager **Dashboard**, view the Manager status in the **System Faults** monitor. The Manager status displays as **Up** and Sensor status is **Active**. ![1-VerifySuccessinstall.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-469b717e-d9e8-f4d5-7a95-09017ada0122.jpg?sv=2026-02-06&spr=https&st=2026-11-20T07%3A49%3A49Z&se=2026-11-20T08%3A49%3A49Z&sr=c&sp=r&sig=ANYthAtqQpmqSAMzUfWSHgL24NITtxWgDOiykrWSTg0%3D) 3. From the Manager, click **Devices** → **** → **Devices** → **Setup** → **Physical Ports** to view the port details of the standalone Sensor. ![Physicalports_standalone.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-5c35488b-1443-5bae-0914-9a9ffdead07e.jpg?sv=2026-02-06&spr=https&st=2026-11-20T07%3A49%3A49Z&se=2026-11-20T08%3A49%3A49Z&sr=c&sp=r&sig=ANYthAtqQpmqSAMzUfWSHgL24NITtxWgDOiykrWSTg0%3D) Click **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Setup** → **Physical Ports** to view the port details of a Sensor in a stack. ![Physicalports_stack.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-377a35ec-9e92-a932-0368-c28b20ba17c9.jpg?sv=2026-02-06&spr=https&st=2026-11-20T07%3A49%3A49Z&se=2026-11-20T08%3A49%3A49Z&sr=c&sp=r&sig=ANYthAtqQpmqSAMzUfWSHgL24NITtxWgDOiykrWSTg0%3D) > [!WARNING] > Important > > If you have configured 100/40 Gigabit SR MTP/MPO or BiDi with internal fail-open network interface modules with the 100 Gbps speed and you want to reconfigure the speed to 40 Gbps, you may have to click **Disable** and then **Enable** the ports once or twice and refresh the **Monitoring Ports** tab to bring up the ports. This also applies to 100/40 Gigabit SR MTP/MPO interface module. 4. A policy named **Default Prevention** is active upon the addition of the Sensor. To view this policy, select **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS**. The **Default Prevention** policy contains attacks already configured with a "blocking" Sensor response action. If any attack in the policy is triggered, the Sensor automatically blocks the attack. To tune this or any other Trellix-provided policies, you can clone the policy and then customize it as described in Trellix Intrusion Prevention System Product Guide.