--- title: "Verify successful installation" slug: "verify-successful-installation-7" tags: ["Hardware"] updated: 2026-09-17T09:54:41Z published: 2026-09-17T09:54:41Z canonical: "docs.trellix.com/verify-successful-installation-7" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify successful installation 1. Type `status` in the Sensor CLI. The status report appears. ![Verify_successful_installation1.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-e71dbefa-8e93-a7c8-41f6-a8afe025c0a1.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A29%3A54Z&se=2026-11-20T09%3A29%3A54Z&sr=c&sp=r&sig=yNPemHluyGsKOZYZ105FyMn%2BTMlIWLIQal3mXj5DNXs%3D) The Sensor parameter `System Initialized` should be `yes`, and for Manager communications `Trust Established` should be `yes`. 2. From the Manager **Dashboard**, view the Manager status in the **System Faults** monitor. The Manager status displays as **Up** and Sensor status is **Active**. ![Verify_successful_installation_2.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-f2472a54-375a-59d3-d8e6-89d538023e03.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A29%3A54Z&se=2026-11-20T09%3A29%3A54Z&sr=c&sp=r&sig=yNPemHluyGsKOZYZ105FyMn%2BTMlIWLIQal3mXj5DNXs%3D) 3. From the Manager, click **Devices** → **** → **Devices** → **Setup** → **Physical Ports** to view the port details of the Sensor. To view port settings, select the port on the Sensor that you cabled. Ensure that your port settings match the cabling. For example, if port 1 is cabled for inline mode, the mode of operation in the port setting should be inline mode. > [!NOTE] > Note > > For more information on port settings, see the chapter Configuring the monitoring and response ports of a Sensor in Trellix Intrusion Prevention System Product Guide. ![Verify_successful_installation_3.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-91d2af9f-bd50-f6a7-d646-80ca2f22de6f.jpg?sv=2026-02-06&spr=https&st=2026-11-20T08%3A29%3A54Z&se=2026-11-20T09%3A29%3A54Z&sr=c&sp=r&sig=yNPemHluyGsKOZYZ105FyMn%2BTMlIWLIQal3mXj5DNXs%3D) 4. A policy named **Default Prevention** is active upon the addition of the Sensor. To view this policy, select **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS Policies**. The **Default Prevention** policy contains attacks already configured with a "blocking" Sensor response action. If any attack in the policy is triggered, the Sensor automatically blocks the attack. To tune this or any other Trellix-provided policies, you can clone the policy and then customize it as described in Trellix Intrusion Prevention System Product Guide.