--- title: "Verify successful installation" slug: "verify-successful-installation-8" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:45Z published: 2026-09-17T09:43:45Z canonical: "docs.trellix.com/verify-successful-installation-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify successful installation **Steps:** 1. Type `status` in the Sensor CLI. The status report appears. ![GUID-33EC5529-DD98-4F8F-B5A0-773ECC78F47B-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-d5649914-bef7-1d95-f0d7-f1bf89c8ccf6.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A40Z&se=2026-11-20T14%3A06%3A40Z&sr=c&sp=r&sig=YJNA3f3DA1pZ6itiecwCf%2BJwpSSEvwvVgsn5Z46B4wA%3D) The Sensor parameter `System Initialized` should be `yes`, and for Manager communication `Trust Established` should be `yes`. 2. Return to the Manager. In the **Manager Home page**, view the Manager status in the **System Faults** section. The Manager status should be **up** and Sensor status should be **active**. ![GUID-F446257C-C796-4A79-9240-9034119931B0-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8f8026e9-4265-6b76-6c18-5b196fc43009.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A40Z&se=2026-11-20T14%3A06%3A40Z&sr=c&sp=r&sig=YJNA3f3DA1pZ6itiecwCf%2BJwpSSEvwvVgsn5Z46B4wA%3D) 3. From the **Manager Home page**, click **Configure** to open the **Configuration** page. 4. Select your added Sensor: **Device List** → ****. The ports for this Sensor appear under the **** node. > [!NOTE] > Note > > indicates the name of the Sensor you added. ![GUID-8AE8020B-4F08-4140-85FF-32A2B1BE1066-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-8dce0360-9108-3c52-5d65-a9dd82a9bdf8.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A40Z&se=2026-11-20T14%3A06%3A40Z&sr=c&sp=r&sig=YJNA3f3DA1pZ6itiecwCf%2BJwpSSEvwvVgsn5Z46B4wA%3D) 5. A policy named **Default Prevention** is active upon the addition of the Sensor. To view this policy, select **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS Policies**. The **Default Prevention** policy contains attacks already configured with a "blocking" Sensor response action. If any attack in the policy is triggered, the Sensor automatically blocks the attack. To tune this or any other Trellix IPS-provided policies, you can clone the policy and then customize it as described in Trellix Intrusion Prevention System Product Guide. 6. Click **Device List** → **** → **Port Settings**. 7. To view port settings, select the port on the Sensor that you cabled. Ensure that your port settings match the cabling. For example, if port 1 is cabled for inline mode, the mode of operation in the port setting should be inline mode. > [!NOTE] > Note > > For more information on port settings, see the chapter Configuring the monitoring and response ports of a Sensor in Trellix Intrusion Prevention System Product Guide.