--- title: "Verify the SNMP setup" slug: "verify-the-snmp-setup-11" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:30:59Z published: 2026-11-19T12:30:59Z canonical: "docs.trellix.com/verify-the-snmp-setup-11" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify the SNMP setup These steps show you how you test the setup for its bypass capability and SNMP traps. 1. On a Windows PC, for example, open the iReasoning MIB browser. 2. Click **File** → **Load MIBs**. A pop-up window appears. 3. Locate the MIB file for the active fail-open kit and click **Open**. The MIB is loaded. 4. Configure the parameters for SNMPv3 traps on the server. 5. Login to the web interface of the fail-open switch. 6. Access **Bypass** tab by following the steps shown in [Enable tap mode for the fail-open switch](/network-and-platform/docs/enable-tap-mode-for-the-fail-open-switch-4) to place the fail -open module into bypass condition and back to inline. 7. snmp traps should be shown( bypass trap) in snmp trap server. You will notice an SNMP trap appear in the list.