These steps show you how you test the setup for its bypass capability and SNMP traps.
On a Windows PC, for example, open the iReasoning MIB browser.
Click File → Load MIBs.
A pop-up window appears.
Locate the MIB file for the Active Fail-Open kit and click Open.
The MIB is loaded.
Configure the parameters for SNMPv3 traps on the server.
Login to the web interface of the Active Fail-Open module.
Use default credentials to access the web interface.
Go to, AFO Configuration → Module <number> to access the configuration page.
Under Heartbeat Setting, deselect Heartbeat Active Mode.
Under Active OP Mode, select Bypass from the drop-down list.
.jpg?sv=2026-02-06&spr=https&st=2026-11-20T12%3A56%3A33Z&se=2026-11-20T13%3A07%3A33Z&sr=c&sp=r&sig=K5flGoE2ia4hTxVCS6D9%2BBHXCMOcgIYJgPkCQJEhTj8%3D)
Click Commit to save your configuration.
Under Heartbeat Setting, deselect Heartbeat Active Mode.
Click Commit to save your configuration.
You will notice an SNMP trap appear in the list.