--- title: "Verify the SNMP setup" slug: "verify-the-snmp-setup-8" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:26:59Z published: 2026-11-19T12:26:59Z canonical: "docs.trellix.com/verify-the-snmp-setup-8" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify the SNMP setup These steps show you how you test the setup for its bypass capability and SNMP traps. 1. On a Windows PC, for example, open the iReasoning MIB browser. 2. Click **File** → **Load MIBs**. A pop-up window appears. 3. Locate the MIB file for the Active Fail-Open kit and click **Open**. The MIB is loaded. 4. Configure the parameters for SNMPv3 traps on the server. 5. Login to the web interface of the Active Fail-Open module. Use default credentials to access the web interface. 6. Go to, **AFO Configuration** → **Module ** to access the configuration page. 7. Under **Heartbeat Setting**, deselect **Heartbeat Active Mode**. 8. Under **Active OP Mode**, select **Bypass** from the drop-down list. ![GUID-DFBA947A-1608-44A5-9481-9DF3B2993CD9-low.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-30298b3d-cab1-15e0-75d9-adc955b489dc(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T13%3A06%3A39Z&se=2026-11-20T14%3A06%3A39Z&sr=c&sp=r&sig=M5b1Tg5IAnvS1yEQzcRxgbZRzrbiyxMo2%2B5IlN8IVfQ%3D) 9. Click **Commit** to save your configuration. 10. Under **Heartbeat Setting**, deselect **Heartbeat Active Mode**. 11. Click **Commit** to save your configuration. You will notice an SNMP trap appear in the list.