--- title: "Verify the SNMP setup" slug: "verify-the-snmp-setup" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:13Z published: 2026-10-05T15:40:13Z canonical: "docs.trellix.com/verify-the-snmp-setup" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify the SNMP setup These steps show you how you test the setup for its bypass capability and SNMP traps. ## Task 1. On a Windows PC, for example, open the iReasoning MIB browser. 2. Click **File** → **Load MIBs**. A pop-up window appears. 3. Locate the MIB file for the Active Fail-Open kit and click **Open**. The MIB is loaded. 4. Configure the parameters for SNMPv3 traps on the server. 5. Login to the web interface of the Active Fail-Open chassis. 6. Access the **Bypass** tab by following the steps shown in [Enable tap/inline mode for the Active Fail-Open module](/network-and-platform/docs/enable-tap-inline-mode-for-the-active-fail-open-module) to place the Active Fail-Open module into bypass condition and back to Inline. 7. snmp traps should be shown( bypass trap) in snmp trap server. ## Results You will notice an SNMP trap appear in the list.