--- title: "Verify your installation" slug: "verify-your-installation-1" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T07:33:43Z published: 2026-09-17T07:33:43Z canonical: "docs.trellix.com/verify-your-installation-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Verify your installation This section describes the steps to verify the installation of a 40G Fail-Open module. Verify the following to make sure your setup is working as designed. **Steps:** 1. If the connection with the Sensor is in inline mode, the installation in inline mode is considered successful if: ![GUID-EBEA0AB8-4845-47EE-B2DF-931A2898CBB5-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-6508ff8a-9799-a5bc-2293-419064754893.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A48Z&se=2026-11-20T21%3A03%3A48Z&sr=c&sp=r&sig=58I8E2XrC5p7E1D3IpB805i%2BaJP7jPVbUBumidl9VD8%3D) - The **IN LINE** LED is solid green. - The **BYP/TAP/DISC** LED is off. - The **HB** LED is flashing green. 2. If the connection with the Sensor is in bypass mode, the installation in bypass mode is considered successful if: ![GUID-4969A080-DDC4-419F-A2E9-185B378D9410-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-74bd4132-7a38-c195-f267-2fb0af481e22.png?sv=2026-02-06&spr=https&st=2026-11-20T20%3A03%3A48Z&se=2026-11-20T21%3A03%3A48Z&sr=c&sp=r&sig=58I8E2XrC5p7E1D3IpB805i%2BaJP7jPVbUBumidl9VD8%3D) - The **IN LINE** LED is off. - The **BYP/TAP/DISC** LED is solid amber. - The **HB** LED is flashing green.