--- title: "View the DoS profiles of a Sensor" slug: "view-the-dos-profiles-of-a-sensor-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/view-the-dos-profiles-of-a-sensor-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # View the DoS profiles of a Sensor The DoS profiles show a comparative display of short-term and long-term distribution for the selected profile. 1. To view the DoS profiles - - For individual Sensors, navigate to **Devices** → **** → **Devices** → **** → **Troubleshooting** → **Denial of Service** → **Profiles**. - For Sensors in HA pair, navigate to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Troubleshooting** → **Denial of Service** → **Profiles**. - (Applicable to NS9600 and NS9500 only) For Sensors in a stack and a HA pair of stack Sensors, navigate to **Devices** → **** → **Devices** → **** → **Member Sensors** → **** → **Troubleshooting** → **Denial of Service** → **Profiles**. The **Dos Profiles** page is displayed. It details the current status of DoS learning mode policies applied to an interface or sub-interface. DoS policy was inherited from the domain upon Sensor addition but might have changed due to the application of a different policy at the interface or sub-interface level. **DoS Profiles page for a individual Sensor**![DoS Profiles page for a individual Sensor](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bd96f338-795b-abb8-f210-e8f04c7633cd(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A14%3A45Z&se=2026-11-20T13%3A14%3A45Z&sr=c&sp=r&sig=Y8eZpyADzXJXPvm5PCPRAj%2FAaiAd7Qxt7pNHJaN5aO8%3D) **DoS Profiles page for member Sensor in a stack**![DoS Profiles page for member Sensor in a stack](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-bceb54c6-750e-23f1-8682-2a7e0f2b175a(7).jpg?sv=2026-02-06&spr=https&st=2026-11-20T12%3A14%3A45Z&se=2026-11-20T13%3A14%3A45Z&sr=c&sp=r&sig=Y8eZpyADzXJXPvm5PCPRAj%2FAaiAd7Qxt7pNHJaN5aO8%3D) **Option definitions** | Option | Definition | | --- | --- | | **Profile** | The sub-interface or VLAN/CIDR ID where a DoS profile was applied. **Default NI** refers to all traffic that is not a part of an interface subdivision, that is, sub-interface, VLAN tag, or CIDR block. | | **Status** | Lists whether the profile is currently learning or detecting. **Learning** means the profile baseline is being built. **Detection** means the learning profile has finished and traffic is being checked against the baseline. | | **Transition Time** | The exact time when the learning profile started analysis or when the active detection for the learning profile began. The **Status** field indicates which process is currently operating. | 2. Select a DoS profile and click **View**. **DoS profile - Advanced Scanning**![DoS profile - Advanced Scanning](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-dbe4fa5c-42ca-fc4c-e093-fda8b2afd2c0(7).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A14%3A45Z&se=2026-11-20T13%3A14%3A45Z&sr=c&sp=r&sig=Y8eZpyADzXJXPvm5PCPRAj%2FAaiAd7Qxt7pNHJaN5aO8%3D) 3. Optionally, select the direction (Example: Inbound) and a measure (example: tcp-control) to display rate data for the measures in the DoS profile applied to the selected interface. When reading the chart, it is helpful to remember that: - The long-term profile is the compilation of the short-term profiles. - The horizontal axis contains buckets of the various packet rates. - The vertical axis indicates the percentage of those rates falling into each bucket. 4. Click **Close** to go back to the **DoS Profiles** page.