--- title: "View the DoS profiles of a Sensor" slug: "view-the-dos-profiles-of-a-sensor" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:30:09Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/view-the-dos-profiles-of-a-sensor" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # View the DoS profiles of a Sensor The DoS profiles show a comparative display of short-term and long-term distribution for the selected profile. ## Task 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. In the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Troubleshooting** → **Denial of Service** → **Profiles**. The **Dos Profiles** page details the current status of DoS learning mode policies applied to an interface or sub-interface. DoS policy was inherited from the domain upon Sensor addition but might have changed due to the application of a different policy at the interface or sub-interface level. DoS Profiles tab ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-2000EDC7-91FA-4D5B-91B7-40B1024AE1DA-low.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A19%3A06Z&se=2026-11-20T14%3A19%3A06Z&sr=c&sp=r&sig=Rm13zn0%2Bm4ewUbzMAEfzS7lD6DIvVNtU6t1I2bBf5H4%3D) | Option | Definition | | --- | --- | | **Profile** | The sub-interface or VLAN/CIDR ID where a DoS profile was applied. **Default NI** refers to all traffic that is not a part of an interface subdivision, that is, sub-interface, VLAN tag, or CIDR block. | | **Status** | Lists whether the profile is currently learning or detecting. **Learning** means the profile baseline is being built. **Detection** means the learning profile has finished and traffic is being checked against the baseline. | | **Transition Time** | The exact time when the learning profile started analysis or when the active detection for the learning profile began. The **Status** field indicates which process is currently operating. | 6. Select a DoS profile and click **View**. DoS profile - Advanced Scanning ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-08B6BD39-EE7F-4663-9430-50AD3E09D074-low.png?sv=2026-02-06&spr=https&st=2026-11-20T13%3A19%3A06Z&se=2026-11-20T14%3A19%3A06Z&sr=c&sp=r&sig=Rm13zn0%2Bm4ewUbzMAEfzS7lD6DIvVNtU6t1I2bBf5H4%3D) 7. Optionally, select the direction (Example: Inbound) and a measure (example: tcp-control) to display rate data for the measures in the DoS profile applied to the selected interface. When reading the chart, it is helpful to remember that: - The long-term profile is the compilation of the short-term profiles. - The horizontal axis contains buckets of the various packet rates. - The vertical axis indicates the percentage of those rates falling into each bucket. 8. Click **Close** to go back to the **DoS Profiles** page.