--- title: "View the Quarantine configuration summary for a Sensor" slug: "view-the-quarantine-configuration-summary-for-a-sensor-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:11Z published: 2026-11-19T12:28:11Z canonical: "docs.trellix.com/view-the-quarantine-configuration-summary-for-a-sensor-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # View the Quarantine configuration summary for a Sensor Before you enable or modify **Quarantine** settings, you can view the summary of the current **Quarantine** for the Sensor. 1. Click the **Devices** tab. 2. Select the domain from the **Domain** drop-down list. 3. On the left pane, click the **Devices** tab. 4. Select the device from the **Device** drop-down list. 5. Select **Setup** → **Quarantine** → **Summary.** You can view the following details in the **Summary** page: - Whether syslog forwarding is enabled for the Sensor and the suppression details. > [!NOTE] > Note > > Click **Logging** to open the syslog **Logging** page for the Sensor. - The **Quarantine** status for each inline Sensor monitoring port. If you enable **Quarantine** domain level, then it is enabled by default for all the inline ports. Similarly, if you disable it at the domain level, it is disabled for all the ports. However, you can enable or disable **Quarantine** for an inline port regardless of the configuration at the domain level.