--- title: "Viewing a DoS profile" slug: "viewing-a-dos-profile" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:53Z published: 2026-10-05T15:39:53Z canonical: "docs.trellix.com/viewing-a-dos-profile" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing a DoS profile The show dospreventionprofile command, when executed, displays the specified DoS prevention profile information for the Sensor that is defined in two arguments: a DoS measure name and a traffic direction. **Syntax:** show dospreventionprofile <dos-measure-name> <inbound | outbound> | Parameter | Description | | --- | --- | | | Indicates the DoS measure name — one of tcp-syn, tcp-syn-ack, tcp-fin, tcp-rst, udp, icmp-echo, icmp-echo-reply, icmp-non-echo-reply, ip-fragment, or non-tcp-udp-icmp. | | | Indicates the direction. It can be inbound or outbound. | **Example - Command execution:** show dospreventionprofile udp inbound Information displayed by the show dospreventionprofile command includes the Sensor's DoS profile and the traffic direction protected by the profile. **Example - Result:** ``` show dospreventionprofile udp inbound ``` ``` packet type: UDP IN (12), profile stage: normal operation (65) ``` ``` long-term average rate=0.000(pkts/s), last_rate=0.000(pkts/s) ``` ``` no attack in progress ``` ``` each line: bin_index, IP_prefix/prefix_len, AS, LT, ST, ltR(ate), stR(ate) ``` ``` AS(%) -- percentage of the IP address space this bin occupies ``` ``` LT(%) -- percentage of long-term traffic that falls into this bin ``` ``` ST(%) -- percentage of short-term traffic that falls into this bin ``` ``` ltRate -- long-term average traffic rate (in pkts/s) for this bin ``` ``` stRate -- short-term traffic rate (in pkts/s) for this bin ``` ``` 0: 0.0.0.0/2 AS=25.000% LT=25.000% ST=25.00% ltR=0.000 stR=0.000 ``` ``` 1: 128.0.0.0/2 AS=25.000% LT=25.000% ST=25.00% ltR=0.000 stR=0.000 ``` ``` 2: 64.0.0.0/2 AS=25.000% LT=25.000% ST=25.00% ltR=0.000 stR=0.000 ``` ``` 3: 192.0.0.0/2 AS=25.000% LT=25.000% ST=25.00% ltR=0.000 stR=0.000 ``` The following is an example of a "bad" bin marked with a "*". The Sensor blocks packets with source IPs in the particular bin. ``` 0: 0.0.0.0/6 AS=1.563% LT=49.969% ST=100.00% stR=1.000 ``` ``` 1: 128.0.0.0/2 AS=25.000% LT=0.021% ST=0.00% stR=0.000 ``` ``` *2: 64.0.0.0/2 AS=25.000% LT=1.615% ST=100.00% ltR=2357.098 stR=148966.400 ``` ``` 3: 192.0.0.0/2 AS=25.000% LT=0.021% ST=0.00% stR=0.000 ``` ``` 4: 32.0.0.0/3 AS=12.500% LT=0.000% ST=0.00% stR=0.000 ``` ``` 5: 16.0.0.0/4 AS=6.250% LT=0.000% ST=0.00% stR=0.000 ``` ``` 6: 8.0.0.0/5 AS=3.125% LT=0.000% ST=0.00% stR=0.000 ``` ``` 7: 4.0.0.0/6 AS=0.000% LT=11.752% ST=0.00% ltR=16885.654 stR=0.000 ```