--- title: "Viewing custom feed details using the CLI" slug: "viewing-custom-feed-details-using-the-cli" updated: 2026-08-25T21:18:25Z published: 2026-08-25T21:18:25Z canonical: "docs.trellix.com/viewing-custom-feed-details-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing custom feed details using the CLI Follow these steps to view custom feed details and to track the number of blacklist entries that were configured for each third-party feed using the CLI. You can view the status of the local feed in the CLI, but not local feed details. To view the custom feed details in the CLI: 1. Log in to the Central Management System CLI. 2. Enable CLI configuration mode. ``` cm-hostname > enable cm-hostname # configure terminal ``` 3. View the details for each type of blacklist entry that was configured for a third-party feed. ``` cm-hostname (config) # show custom content feed status Total no. of feeds: 5 Total count of all entries in feeds : 22 custom_feed_1        source: custom feed test        action: alert        type : url        url count : 6        update_date : 2017/07/06 22:38:26 custom_feed_2        source: IP feed        action: alert        type : ip        ip count : 4        update_date : 2017/07/06 22:24:25 custom_feed_3        source: URL flat file        action: alert        type : url        url count : 6        update_date : 2017/07/06 22:26:15 custom_feed_4        source: STIX domain watchlist        action: block        type : stix        domain count : 3        update_date : 2017/07/06 22:32:45 custom_feed_5        source: STIX URL watchlist        action: alert        type : stix        url count : 3        update_date : 2017/07/06 22:34:03 ``` 4. View the status of the local feed. ``` cm-hostname (config) # show localsig LocalSig Generator      Enabled : YES      Running : running Rule Versions : - Active rules : 0    LocalFeed : Enabled ``` :