--- title: "Viewing detailed statistics of file inspection using the CLI" slug: "viewing-detailed-statistics-of-file-inspection-using-the-cli" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:23Z published: 2026-09-12T20:42:23Z canonical: "docs.trellix.com/viewing-detailed-statistics-of-file-inspection-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing detailed statistics of file inspection using the CLI Use the CLI commands in this procedure to view detailed file inspection statistics and configuration details. You can view the following: - [Preprocessor configuration](/network-and-platform/docs/viewing-detailed-statistics-of-file-inspection-using-the-cli#preprocessor-configuration) - [File statistics](/network-and-platform/docs/viewing-detailed-statistics-of-file-inspection-using-the-cli#file-statistics) - [IP address statistics](/network-and-platform/docs/viewing-detailed-statistics-of-file-inspection-using-the-cli#ip-address-statistics) - [Streamed traffic statistics](/network-and-platform/docs/viewing-detailed-statistics-of-file-inspection-using-the-cli#streamed-traffic-statistics) - [HTTP traffic statistics](/network-and-platform/docs/viewing-detailed-statistics-of-file-inspection-using-the-cli#http-traffic-statistics) - [Combined file inspection tatistics](/network-and-platform/docs/viewing-detailed-statistics-of-file-inspection-using-the-cli#combined-file-inspection-tatistics) The command output display statistics for each bot instance that is running. > [!NOTE] > Note > > You can view file inspection statistics only using the CLI. **Prerequisites** - Administrator, Operator, Monitor, or Analyst access to the Network Security appliance ### Preprocessor configuration **To view the file inspection preprocessor configuration:** 1. Go to CLI enable mode. ```plaintext hostname > enable ``` 2. View the configuration of the preprocessor. ```plaintext hostname # show bottracker preprocessor config  Bott Instance  0  HTTP Inspect                        : IOC Config Info Number of URI Feeds           : 2 Total No. of URI Entries      : 11067 Number of Blacklist Entry     : 11040 Number of Alert Entry         : 27 Number of Duplicate Entries   : 0 Number of Domain Feeds        : 4 Total No. of Domain Entries   : 548 Number of Blacklist Entry     : 541 Number of Alert Entry         : 7 Number of Duplicate Entries   : 2 Memory Limit Reached          : No  IP Reputation Config Preprocessor Enabled          : Yes Number of Feeds               : 6 File Load Error Count         : 0 Total Number of Entry         : 32 Number of Whitelist Entry     : 22 Number of Blacklist Entry     : 0 Number of Alert Entry         : 10 Number of Duplicate Entry     : 11 Number of Invalid Entry       : 0 Number of Insert Entry failure: 0 Memory Limit Reached          : No  File Inspect Config File Inspect Enabled          : No Data Path Configuration       : Disabled Hash Configured               : No MD5 & SHA256                  : Enabled  Whitelist Domain Config Info Number of Whitelist Domain Feeds    : 1 Total No. of Whitelist Entries      : 1 Bott Instance  1 HTTP Inspect: IOC Config Info       ..... ``` ### File statistics **To view the detailed file inspection statistics:** 1. Go to CLI enable mode. ```plaintext hostname > enable ``` 2. View the detailed file inspection statistics. ```plaintext hostname # show bottracker preprocessor file-inspect stats ``` ```plaintext   Bott Instance  0 File Inspect Stats Total Files Processed                        : 0 Number of Signature Callbacks                : 0 Number of Pkt Matching Block Action          : 0 Number of Pkt Matching Alert Action          : 0 Number of Partial Download Request           : 0 Number of Partial Req Matching Block Action  : 0 Number of Partial Req Matching Alert Action  : 0 Number of Partial Req Lookup Failure         : 0 Number of Sessions Without File Extraction   : 0 ..... ``` ### IP address statistics **To view the statistics for file inspection based on matched IP addresses:** 1. Go to CLI enable mode. ```plaintext hostname > enable ``` 2. View the IP address statistics. ```plaintext hostname # show bottracker preprocessor ip-reputation stats ``` ```plaintext   Bott Instance  0 IP Reputation Stats Config Index                                 : 1 Number of Pkt Bypass Reputation Process      : 0 Number of Pkt Received                       : 0 Number of Pkt Lookup Failure                 : 0 Number of Pkt Matching Whitelist Trust Action: 0 Number of Pkt Matching Block Action          : 0 Number of Pkt Matching Alert Action          : 0 Number of Pkt Matching Source IP             : 0 Number of Pkt Matching Dest IP               : 0 Number of Pkt Matching Outer Source IP       : 0 Number of Matching Outer Dest IP             : ``` ```plaintext   Bott Instance  1 IP Reputation Stats Config Index: 1 Number of Pkt Bypass Reputation Process: 0 ..... ``` ### Streamed traffic statistics **To view the statistics for streamed traffic:** 1. Go to CLI enable mode. ```plaintext hostname > enable ``` 2. View the stream statistics. ```plaintext hostname # show bottracker preprocessor stream stats ``` ```plaintext    Bott Instance  0 Stream Session Stats Total TCP Session                   : 0 Total UDP Session                   : 0 Total ICMP Session                  : 0 Total IP Session                    : 0 Total TCP Prune Session             : 0 Total UDP Prune Session             : 0 Total ICMP Prune Session            : 0 Total IP Prune Session              : 0 Total TCP timeout                   : 0 Total TCP Stream tracker created    : 0 Total TCP Stream tracker released   : 0 Total TCP Stream Segment created    : 0 Total TCP Stream Segment released   : 0 Total TCP Stream Segment memory used: 0 Total TCP Rebuild packets           : 0 Total TCP Rebuild Seq Used          : 0 Total TCP overlaps                  : 0 Total TCP discard                   : 0 Total TCP gaps                      : 0 Total UDP Timeouts                  : 0 Total UDP Session Created           : 0 Total UDP Session release           : 0 Total UDP Discard                   : 0 Total ICMP Timeouts                 : 0 Total ICMP Session Created          : 0 Total ICMP Session release          : 0 Total IP Timeouts                   : 0 Total Events                        : 0 Total Internal Events               : 0 Total TCP session filtered          : 0 Total TCP session inspected         : 0 Total TCP session tracked           : 0 Total UDP session filtered          : 0 Total UDP session inspected         : 0 Total UDP session tracked           : 0 ``` ### HTTP traffic statistics **To view the statistics for HTTP traffic:** 1. Go to CLI enable mode. ```plaintext hostname > enable ``` 2. View the HTTP statistics. ```plaintext hostname # show bottracker preprocessor http stats ``` ```plaintext   Bott Instance  0 HTTP Inspect Stats Number of Unicode Packets              : 0 Number of Double Unicode Packets       : 0 Number of non-ascii Characters         : 0 Number of POST Request                 : 0 Number of GET Request                  : 0 Number of gzip packet Number of Session Created              : 0 Number of Session Released             : 0 GZIP mempool usage                     : 0 HTTP mempool usage                     : 0 HTTP Inspect: IOC URI Stats No. of IOC URI Entries: 11067 Number of IOC Matching Block Action    : 0 Number of IOC Matching Alert Action    : 0 HTTP Inspect: IOC Domain Stats No. of IOC Domain Entries: 548 Number of IOC Matching Block Action    : 0 Number of IOC Matching Alert Action    : 0 HTTP Inspect: Whitelist Domain Stats No. of Whitelist Domain Entries        : 1 No. of Matching Whitelist Domain       : 0 ``` ### Combined file inspection tatistics **To view combined detailed preprocessor statistics for file inspection:** 1. Go to CLI enable mode. ```plaintext hostname > enable ``` 2. View all statistics. ```plaintext hostname # show bottracker preprocessor stats ``` The command output displays statistics for IP reputation, file inspection, streamed traffic, and HTTP traffic.