--- title: "Viewing HA interface status using the CLI" slug: "viewing-ha-interface-status-using-the-cli-1" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T14:50:18Z published: 2026-10-01T14:50:18Z canonical: "docs.trellix.com/viewing-ha-interface-status-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing HA interface status using the CLI Use the commands in this section to view the status of the HA interfaces. ### Note This procedure shows the status on one node at a time. To view the status for both nodes at the same time, use the` show ha status `command. To view the HA interface status: 1. Log in to either node. 2. Enable the CLI enable mode: ```plaintext node-hostname > enable ``` 3. View the status of the node's interfaces: ```plaintext node-hostname # show ha interfaces ``` 4. Repeat these steps on the other node to view the status of its interfaces. For a description of the interface states, see [Viewing the cluster status](/network-and-platform/docs/viewing-the-cluster-status-1). ### Example The following example shows the status of the HA interfaces on node1 in a dual-interface configuration. ```plaintext node1 # show ha interfaces Interfaces default: up backup: up ``` :