Viewing managed appliance information using the CLI

Use the commands in this section to view information about managed appliances.

Note

See Appliance Information for a description of the command output.

To view appliance information:

Go to CLI enable mode:
```
hostname > enable
```
View basic appliance information:
```
hostname # show cmc appliances
```
View the groups to which the appliances belong:
```
hostname # show cmc groups
```
View detailed information about a specific appliance:
```
hostname # show cmc appliances <applianceName>
```

Example

This example shows basic information about the three appliances this Central Management System appliance manages.

hostname # show cmc appliances
Appliance FX-03:
   Address:               172.16.109.163
   Enabled:               yes
   Connected:             yes (server-initiated)
   Status check OK:       no
   Version compatible:    yes

Appliance HX-05:
   Address:               10.2.201.20
   Enabled:               yes
   Connected:             yes (server-initiated)
   Status check OK:       yes
   Version compatible:    no

Appliance NX-04:
   Address:               172.16.74.50
   Enabled:               yes
   Connected:             yes (server-initiated)
   Status check OK:       yes
   Version compatible:    yes

Note

For an example of the show cmc groups command output, see Adding Appliances to Groups Using the CLI. For an example of the show cmc appliances <applianceName> command output, see Checking Appliance Status and Health Using the CLI.