--- title: "Viewing managed appliance information using the CLI" slug: "viewing-managed-appliance-information-using-the-cli-3" updated: 2026-08-25T21:17:55Z published: 2026-08-25T21:17:55Z canonical: "docs.trellix.com/viewing-managed-appliance-information-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing managed appliance information using the CLI Use the commands in this section to view information about managed appliances. ### Note See [Appliance Information](/docs/viewing-and-modifying-managed-appliance-information) for a description of the command output. To view appliance information: 1. Go to CLI enable mode: ``` hostname > enable ``` 2. View basic appliance information: ``` hostname # show cmc appliances ``` 3. View the groups to which the appliances belong: ``` hostname # show cmc groups ``` 4. View detailed information about a specific appliance: ``` hostname # show cmc appliances ``` ### Example This example shows basic information about the three appliances this Central Management System appliance manages. ``` hostname # show cmc appliances Appliance FX-03:   Address:               172.16.109.163   Enabled:               yes   Connected:             yes (server-initiated)   Status check OK:       no   Version compatible:    yes Appliance HX-05:   Address:               10.2.201.20   Enabled:               yes   Connected:             yes (server-initiated)   Status check OK:       yes   Version compatible:    no ``` ``` Appliance NX-04:   Address:               172.16.74.50   Enabled:               yes   Connected:             yes (server-initiated)   Status check OK:       yes   Version compatible:    yes ``` ### Note For an example of the` show cmc groups `command output, see [Adding Appliances to Groups Using the CLI](/docs/adding-appliances-to-groups-using-the-cli). For an example of the` show cmc appliances <applianceName> `command output, see [Checking Appliance Status and Health Using the CLI](/docs/checking-status-and-health-of-managed-appliances-using-the-cli). :