--- title: "Viewing the data exfiltration whitelist using the Web UI" slug: "viewing-the-data-exfiltration-whitelist-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/viewing-the-data-exfiltration-whitelist-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the data exfiltration whitelist using the Web UI Use the **Data Exfiltration Detection** tab to view and manage the data exfiltration alerts whitelist. This whitelist specifies *destination IPv4 addresses*. The appliance does not generate data exfiltration alerts for data uploads to hosts or networks in the data exfiltration whitelist. ![Settings_DataExfiltration_Whitelist.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-61bc84a0-39cd-13db-7a30-ca4b758ec477.png?sv=2026-02-06&spr=https&st=2026-11-20T05%3A09%3A38Z&se=2026-11-20T06%3A09%3A38Z&sr=c&sp=r&sig=3l1474xJ%2FO%2Ft9MAGsmKnQxKQacwqEB1ml2v%2BjjxDoJA%3D) ### Note SmartVision maintains two whitelists. The **SmartVision alerts whitelist** applies to all post-exploitation attacker events, including data exfiltration events. The **data exfiltration detection whitelist** applies to data exfiltration events only. ### Prerequisites - Admin access to the SmartVision appliance. To view the data exfiltration detection whitelist: 1. Log in to the appliance Web UI and select **Settings > SmartVision Configuration**. 2. Click the **Data Exfiltration Detection** tab. The Whitelist Networks panel contains the destination IP address 3. Enter the address range in classless inter-domain routing (CIDR) format. :