--- title: "Viewing the HA replication status using the CLI" slug: "viewing-the-ha-replication-status-using-the-cli-1" tags: ["Central Management System", "Install and Get Started"] updated: 2026-10-01T15:12:43Z published: 2026-10-01T15:12:43Z canonical: "docs.trellix.com/viewing-the-ha-replication-status-using-the-cli-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the HA replication status using the CLI Use the commands in this section to view the HA replication status. ### Note This procedure shows the status on one node at a time. To view the status for both nodes at the same time, use the` show ha status `command. To view HA replication status: 1. Log in to either node. 2. Enable the CLI enable mode: ```plaintext node-hostname > enable ``` 3. View the status: ```plaintext node-hostname # show ha replication status ``` 4. Repeat these steps on the other node. For a description of the replication states, see [Viewing the cluster status](/network-and-platform/docs/viewing-the-cluster-status-1) . ### Examples alerts: running The following example shows the HA replication status of a cluster that is healthy and running: ```plaintext node1# show ha replication status configuration: running configuration in sync:  yes security content:  running lag time:  00:00.00.001378 node1# ```