--- title: "Viewing the home network list using the CLI" slug: "viewing-the-home-network-list-using-the-cli" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-10-01T11:56:08Z published: 2026-10-01T11:56:08Z canonical: "docs.trellix.com/viewing-the-home-network-list-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the home network list using the CLI Follow these steps to view the IP addresses in the data exfiltration detection home network. When data exfiltration detection is enabled, the appliance monitors the egress traffic from the hosts specified in the home network list. The list is empty by default. Use the `show smartvision config` command to view the data exfiltration homenet list. For detailed information about the command, see [show smartvision config](/network-and-platform/docs/show-smartvision-config). ### Prerequisites - Admin access to the SmartVision appliance. To view the data exfiltration detection homenet list: 1. Log in to the appliance CLI and go to enable mode: ```plaintext hostname > enable ``` 2. View the configuration. The home networks are listed in the **Data exfil detection customer networks** section of the `show smartvision config` command output. ```plaintext hostname # show smartvision config ``` ### Examples In the following example, the data exfiltration detection homenet list is empty. The appliance does not monitor any hosts for data exfiltration activity. ```plaintext hostname # show smartvision config SmartVision Config              .              .              .        Data exfil detection customer networks:                None configured              .              .              . ``` In the following example, SmartVision is enabled and the hosts with IP addresses from 192.168.0.0 through 192.168.0.255 are monitored for data exfiltration activity: ```plaintext hostname # show smartvision config SmartVision Config              .              .              .        Data exfil detection customer networks:                192.168.0.0/24              .              .              . ``` :