--- title: "Viewing the PX metadata sources" slug: "viewing-the-px-metadata-sources-2" tags: ["Install and Get Started", "NDR 4.x", "Customer", "Network Security"] updated: 2026-11-17T09:22:39Z published: 2026-11-17T09:22:39Z canonical: "docs.trellix.com/viewing-the-px-metadata-sources-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the PX metadata sources To view the information of all the Packet Capture appliances connected to your NDR appliance, navigate to![Main_menu.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-0124baa3-4d5b-b290-686f-053b2ba4658f(4).png?sv=2026-02-06&spr=https&st=2026-11-19T13%3A08%3A27Z&se=2026-11-19T14%3A08%3A27Z&sr=c&sp=r&sig=wE2m1b9VSoaz1r%2BOCNmuU28QsWfMvGuk3eljv%2FME4Is%3D) and select **PX Metadata** under **CONFIGURATION** in the NDR Web UI. The connected Packet Capture appliances act as metadata sources for your NDR appliance. You can also filter the information by **Address**, **Port** or **Metadata Source Directory**. On the **PX Metadata** page, the following data is displayed: - IP addresses of all the Packet Capture appliances. - Metadata synchronization status. - The network port over which the communication is established between the PX and the NDR appliances. - Metadata source directory of each Packet Capture appliance. - Health status of each Packet Capture appliance: tunnel and rsync connection status.