--- title: "Viewing the SmartVision alerts whitelist using the Web UI" slug: "viewing-the-smartvision-alerts-whitelist-using-the-web-ui" tags: ["Network Security (NX)", "Product Usage"] updated: 2026-09-02T17:27:05Z published: 2026-09-02T17:27:05Z canonical: "docs.trellix.com/viewing-the-smartvision-alerts-whitelist-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the SmartVision alerts whitelist using the Web UI Use the **SmartVision Alerts Configuration** tab to view the alerts whitelist. Each entry in the list specifies a combination of conditions. If a SmartVision event matches all conditions specified by any entry in the whitelist, the appliance does not generate an alert for that event. ![Settings_SmartVision_Whitelist.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-1d1b12ed-ef9d-d712-e3cb-e64499b5983c.png?sv=2026-02-06&spr=https&st=2026-11-20T06%3A24%3A09Z&se=2026-11-20T07%3A24%3A09Z&sr=c&sp=r&sig=V9KaPJNNpoOFJzoeB5hwknsUJMUUJUgFM0ItvFGk9z4%3D) Each whiteslist entry specifies one or more of the following conditions: **Rule ID** A single SmartVision rule ID. **Source IP / Mask** A single IPv4 or IPv6 source address, specified in classless inter-domain routing CIDR format (`<ipAddress>/<prefix>`). **Destination IP / Mask** A single IPv4 or IPv6 destination address specified in CIDR format. ### Prerequisites - Admin access to the SmartVision appliance. - SmartVision is enabled. To view the alerts whitelist: 1. Log in to the appliance Web UI and select **Settings > SmartVision Configuration**. 2. Click **SmartVision Alerts Configuration**. 3. View the contents of the Alert Whitelist panel. :