--- title: "Viewing the statistics for the ICAP service using the CLI" slug: "viewing-the-statistics-for-the-icap-service-using-the-cli-1" tags: ["Product Usage", "CMS 11.x", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Network Security"] updated: 2026-08-24T20:40:11Z published: 2026-08-24T20:40:11Z canonical: "docs.trellix.com/viewing-the-statistics-for-the-icap-service-using-the-cli-1" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the statistics for the ICAP service using the CLI Use the `show icap-service stats` command in this topic to view the collected statistics based on ICAP traffic that is monitored on the Intelligent Virtual Execution - Server appliance. Details of the statistics for the ICAP service include the following: - Number of request modifications (REQMOD) that were received for the ICAP service on the Intelligent Virtual Execution - Server appliance. - Number of request modifications blocked. - Number of response modifications (RESPMOD) that were received for the ICAP service on the Intelligent Virtual Execution - Server appliance. - Number of response modifications blocked. - Total number of request and response modifications that were received for the ICAP service on the Intelligent Virtual Execution - Server appliance. - Number of request and response modifications that were received per second for the ICAP service on the Intelligent Virtual Execution - Server appliance. - Total number of HTTP flow packets that were decapsulated from ICAP traffic and submitted for analysis. **Prerequisites** - Administrator, Operator, Monitor, or Analyst access to the Intelligent Virtual Execution - Server appliance. - Make sure that the third-party device settings are configured so that the device can act as an ICAP client. For details about the prerequisites for the ICAP client configuration, see [ICAP client configuration prerequisites](/network-and-platform/docs/icap-client-configuration-prerequisites-1). - You have enabled the ICAP service on the ADD Product Series appliance. For details about how to enable the ICAP service, see [Enabling or disabling ICAP service using the CLI](/network-and-platform/docs/enabling-or-disabling-the-icap-service-1). - You have enabled the response modification mode. For details about how to enable the response modification mode, see [Enabling or disabling ICAP request and response modification modes using the CLI](/network-and-platform/docs/enabling-or-disabling-the-icap-request-and-response-modification-modes). - You have configured the ICAP service settings so that the Intelligent Virtual Execution - Server appliance can run an ICAP server. For details about how to configure the ICAP service settings, see [Configuring the ICAP server port and SSL certificate using the CLI](/network-and-platform/docs/configuring-the-icap-server-port-and-ssl-certificate-1). **To view the statistics for the ICAP service:** 1. Go to CLI enable mode. ``` hostname > enable ``` 2. View the statistics collected for the ICAP service. ``` hostname # show icap-service stats ICAP Service Statistics: ------------------------ ICAP REQMOD Received            : 618 ICAP REQMOD Blocked             : 13 ICAP RESPMOD Received           : 3256 ICAP RESPMOD Blocked            : 1 ICAP File Submissions           : 2915 ``` When using REQMOD mode, a single upload request can now include up to five files. In this case, the **ICAP REQMOD Received** stat will increase by 1, while the **ICAP File Submissions** stat will show the total number of files uploaded (up to five files per request).