--- title: "Viewing the statistics for the ICAP service using the CLI" slug: "viewing-the-statistics-for-the-icap-service-using-the-cli-2" tags: ["Product Usage", "EX 11.x", "FX 11.x", "AX 11.x", "NX 11.x", "Network Security"] updated: 2026-09-12T20:42:40Z published: 2026-09-12T20:42:40Z canonical: "docs.trellix.com/viewing-the-statistics-for-the-icap-service-using-the-cli-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the statistics for the ICAP service using the CLI Use the `show icap-service stats` command in this topic to view the collected statistics based on ICAP traffic that is monitored on the Network Security appliance. Details of the statistics for the ICAP service include the following: - Number of request modifications (REQMOD) that were received for the ICAP service on the Network Security appliance. - Number of request modifications blocked. - Number of response modifications (RESPMOD) that were received for the ICAP service on the Network Security appliance. - Number of response modifications blocked. - Total number of request and response modifications that were received for the ICAP service on the Network Security appliance. - Number of request and response modifications that were received per second for the ICAP service on the Network Security appliance. - Total number of HTTP flow packets that were decapsulated from ICAP traffic and submitted for analysis. **Prerequisites** - Administrator, Operator, Monitor, or Analyst access to the Network Security appliance. - Make sure that the third-party device settings are configured so that the device can act as an ICAP client. For details about the prerequisites for the ICAP client configuration, see [ICAP client configuration prerequisites](/network-and-platform/docs/icap-client-configuration-prerequisites-2). - You have enabled the ICAP service on the ADD Product Series appliance. For details about how to enable the ICAP service, see[Enabling or disabling ICAP service Using the Web UI](/network-and-platform/docs/enabling-or-disabling-icap-service-using-the-web-ui) or [Enabling or disabling ICAP service using the CLI](/network-and-platform/docs/enabling-or-disabling-icap-service-using-the-cli). - You have enabled the request modification mode or response modification mode. For details about how to enable the request modification mode or response modification mode, see [Enabling or disabling ICAP request and response modification modes using the Web UI](/network-and-platform/docs/enabling-or-disabling-icap-request-response-modification-modes-web-ui) or [Enabling or disabling ICAP request and response modification modes using the CLI](/network-and-platform/docs/enabling-or-disabling-icap-request-and-response-modification-modes-using-the-cli) . - You have configured the ICAP service settings so that the Network Security appliance can run an ICAP server. For details about how to configure the ICAP service settings, see [Configuring the ICAP server port and SSL certificate using the Web UI](/network-and-platform/docs/configuring-the-icap-server-port-and-ssl-certificate-using-the-web-ui) or [Configuring the ICAP server port and SSL certificate using the CLI](/network-and-platform/docs/configuring-the-icap-server-port-and-ssl-certificate-using-the-cli). **To view the statistics for the ICAP service:** 1. Go to CLI enable mode. ``` hostname > enable ``` 2. View the statistics collected for the ICAP service. ``` hostname # show icap-service stats ICAP Service Statistics: ------------------------ ICAP REQMOD Received            : 116209 ICAP REQMOD Blocked             : 10 ICAP RESPMOD Received           : 78 ICAP RESPMOD Blocked            : 0 Total ICAP Requests             : 116287 ICAP Requests Per Second        : 0 Packets Sent to Analysis        : 997068 ```