--- title: "Viewing the statistics for the ICAP service using the CLI" slug: "viewing-the-statistics-for-the-icap-service-using-the-cli" tags: ["Product Usage", "FX 10.x", "AX 10.x", "NX 10.x", "Network Security"] updated: 2026-08-24T20:40:11Z published: 2026-08-24T20:40:11Z canonical: "docs.trellix.com/viewing-the-statistics-for-the-icap-service-using-the-cli" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing the statistics for the ICAP service using the CLI Use the `show icap-service stats` command in this topic to view the collected statistics based on ICAP traffic that is monitored on the Intelligent Virtual Execution - Server appliance. Details of the statistics for the ICAP service include the following: - Number of response modifications (RESPMOD) that were received for the ICAP service on the Intelligent Virtual Execution - Server appliance. - Number of response modifications blocked. - Total number of HTTP flow packets that were decapsulated from ICAP traffic and submitted for analysis. **Prerequisites** - Administrator, Operator, Monitor, or Analyst access to the Intelligent Virtual Execution - Server appliance. - Make sure that the third-party device settings are configured so that the device can act as an ICAP client. For details about the prerequisites for the ICAP client configuration, see [ICAP client configuration prerequisites](/network-and-platform/docs/icap-client-configuration-prerequisites). - You have enabled the ICAP service on the ADD Product Series appliance. For details about how to enable the ICAP service, see Enabling or disabling ICAP service using the CLI. - You have enabled the response modification mode. For details about how to enable the response modification mode, see Enabling or disabling ICAP response modification modes using the CLI . - You have configured the ICAP service settings so that the Intelligent Virtual Execution - Server appliance can run an ICAP server. For details about how to configure the ICAP service settings, see Configuring the ICAP server port and SSL certificate using the CLI. **To view the statistics for the ICAP service:** 1. Go to CLI enable mode. ``` hostname > enable ``` 2. View the statistics collected for the ICAP service. ``` hostname # show icap-service stats ICAP Service Statistics: ------------------------ ICAP REQMOD Received            : 0 ICAP REQMOD Blocked             : 0 ICAP RESPMOD Received           : 0 ICAP RESPMOD Blocked            : 0 ICAP Files Submissions          : 0 ```