--- title: "Viewing Tools menu availability using the CLI" slug: "viewing-tools-menu-availability-using-the-cli-3" updated: 2026-08-25T21:18:33Z published: 2026-08-25T21:18:33Z canonical: "docs.trellix.com/viewing-tools-menu-availability-using-the-cli-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Viewing Tools menu availability using the CLI Use either of the following commands to view whether users can access the Tools menu. - ``` show bootvar ``` - ``` show images ``` If a Tools menu password is set (either the default password or a configured password), users can access the Tools menu. If the Tools menu password is disabled, users cannot access the Tools menu. ### Examples The following example from a Network Security appliance shows that the Tools menu password is set, so users can access the Tools menu. ``` nx-05 > show bootvar Installed images:  Partition 1:  wmps wMPS (wMPS) 7.4.0 xxx  Partition 2:  wmps wMPS (wMPS) 8.0.0 xxx Last boot partition: 1 Next boot partition: 1 Boot manager admin password:      undisclosed password set Boot manager tools menu password: undisclosed password set ... ``` The following example shows that the Tools menu password is disabled, so users cannot access the Tools menu. ``` nx-01 > show images Installed images: ``` ```  Partition 1:  wmps wMPS (wMPS) 7.4.0 ...    Partition 2:  wmps wMPS (wMPS) 8.0.0 ... No image files are available to be installed. No image install currently in progress. Boot manager admin password:          undisclosed password set Boot manager tools menu password:     password disabled ``` :