--- title: "watch \"<show command>\" interval <seconds>" slug: "watch-show-command-interval-seconds" tags: ["Reference", "CMS 11.x", "EX 11.x", "HX 10.x", "FX 11.x", "AX 11.x", "NX 11.x", "IVX 11.x", "Customer", "Network Security"] updated: 2026-08-04T17:23:24Z published: 2026-08-04T17:23:24Z canonical: "docs.trellix.com/watch-show-command-interval-seconds" stale: true --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # watch "<show command>" interval <seconds> Enables all "show" cli commands to display outputs at regular intervals without manual intervention, The default interval is 30 seconds. ****Blocked Commands**** The CLI watch command is not available for some show commands, such as those that perform continuous logging or that produce very long output. The commands are blocked at node level, which means that all the sub-tree nodes till the leaf node gets blocked. For example, when the `show eula` command is blocked, the `show eula status` and `show eula text` are also blocked. The following is a partial list of blocked show commands that cannot be watched. The list is subject to change. - `show configuration` - `show running-config` - `show signer-whitelist` - `show cli commands` - `show custom` - `show eula` - `show log` - `show logging` - `show logging-filewise` - `show metadata` - `show raid` - `show web log` - `show web logging` - `show managed-defense` - `show terminal` - `show smartvision` ### Syntax `watch "<show command>" interval <seconds>` ### Parameters `show command` The command to be watched. All show commands are valid except those listed under “Blocked commands.” `seconds` How often to display output, in seconds. The range is from 2 to 3600 seconds. The default value is 30 seconds ### Examples The following examples watches the show clock command at the default interval. `hostname (config) # watch "show clock"` `Every 30.0s: cli -m config -t 'show clock'` `Mon Jul 10 10:04:26 2023` `Time:10:04:27` `Date:2023/07/10` `Time zone:UTC (Etc/UTC) UTC` `offset: same as UTC` The following example watches the show clock command every 2 seconds. `hostname (config) # watch "show clock" interval` `Every 2.0s: cli -m config -t 'show clock'` `Mon Jul 10 10:07:14 2023` `Date:2023/07/10` `Time zone:UTC (Etc/UTC)` `UTC offset:same as UTC` ### User Role Admin, Operator, or Monitor ### Command Mode Enable ### Supported Appliances Malware Analysis: Release 10.0 Central Management System: Release 10.0 Email Security — Server: Release 10.0 File Protect: Release 10.0 Network Security: Release 10.0 **Endpoint Security (HX):** Release 10.0