The watchdog process reboots the device whenever an unrecoverable failure is detected in the device.
Syntax:
watchdog <on | off | status>
Parameter | Description |
|---|---|
<on> | Enables the watchdog |
<off> | Disables the watchdog. Use it when a Sensor reboots continuously due to repeated system failure. |
<status> | Displays the status of the watchdog process ('on' or 'off') |
Sample Output:
For Sensor, the output is as shown below:
intruShell@john> watchdog statuswatchdog = off
Applicable to:
NS-series Sensors