--- title: "What's new" slug: "what-s-new-31" tags: ["Release Notes", "IPS 11.1.x"] updated: 2026-10-01T10:06:22Z published: 2026-10-01T10:06:22Z canonical: "docs.trellix.com/what-s-new-31" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # What's new ### New features This release of the Trellix Intrusion Prevention System does not include any new features. ### Enhancements This release of the Trellix Intrusion Prevention System includes the following enhancements: **Support for RSA 4096-bit key self-signed and CA-signed certificates** Starting with this release of 11.1, trust between the Manager and Sensor could also be established by using self-signed and CA-signed certificates with a 4096-bit key. > [!NOTE] > Note > > When deploying the device in a CC configuration, you must use only the RSA 2048-bit key. For more information, see [Managing Certificates for Manager and Sensor](/network-and-platform/docs/managing-certificates-for-manager-and-sensor-5) in [Trellix Intrusion Prevention System 11.1.x Product Guide](/network-and-platform/docs/trellix-intrusion-prevention-system-overview-18) **Support for DNS response fields for layer 7 data collection** In 11.1 Minor 6 release, Trellix IPS provided support for the collection of layer 7 data for DNS request fields. In this release of 11.1, Trellix IPS extends its support for the collection layer 7 data for DNS response fields as well, and the export of DNS response based L7 metadata to other Trellix products, such as Trellix Network Investigator (NI). You can navigate to **Devices** → **** → **Devices** → **** → **Setup** → **Advanced** → **L7 Data Collection** page and enable L7 data collection for DNS request and response fields per interface or sub-interface of selected Sensors. > [!NOTE] > Note > > To view or customize both DNS request and response fields, you need to use Manager and Sensor that are running on 11.1 Update 7 release versions, and a compatible signature set (11.10.23.3 and above) with DNS related attack signatures. For more information, [Enable Layer 7 Data Collection for an interface or sub-interface](/network-and-platform/docs/enable-layer-7-data-collection-for-an-interface-or-subinterface) in [Trellix Intrusion Prevention System 11.1.x Product Guide](/network-and-platform/docs/trellix-intrusion-prevention-system-overview-18). **Introduction of SmartVision attacks** Trellix IPS now includes SmartVision attacks, a new set of native IPS attack definitions. These attacks generate base events that allow for more comprehensive and effective detection and correlation of network activities and potential threats, particularly for the lateral movement, when the integration between Trellix IPS and Trellix NI is enabled. SmartVision attack definitions are included in the IPS signature set and automatically added into the default IPS policies (except **Default DoS and Reconnaissance Only** policy) with severity levels set to **Low** and higher, when a compatible signature set is in use. When a SmartVision alert/attack is detected in any customer network environment, Manager sends the relevant alert data in JSON format to Trellix NI. NI consumes and utilizes these base events that enable it to perform more effective threat detection and correlation. Note the following when you start working with SmartVision attacks: - You need a Manager and Sensor running on 11.1 Update 7 versions or later, along with a compatible signature set (11.10.23.3 and above) that includes SmartVision attack signatures. - There should be successful integration between Trellix IPS and Trellix NI. The Manager sends SmartVision attack signatures to only those Sensors that have integration with Trellix NI enabled at the domain or device level. - After changing NI integration configuration in selected Sensors over the **Client Group Association** tab (at both domain and device levels), you must deploy configuration changes to the Sensor - You can configure and update the settings of SmartVision attacks in the **Policy** → **** → **Intrusion Prevention** → **Policy Types** → **IPS** page. However, the **Quarantine**, **Block**, and **Capture Packets** (for **Attack and Pre-Attack** and **Post Attack**) sections are not available for configuration for the attack IDs related to SmartVision attacks in the Manager, as these options are disabled by the signature set. For more information, see [Harnessing SmartVision attacks for effective threat detection and response](/network-and-platform/docs/harnessing-smartvision-attacks-for-effective-threat-detection-and-response-3) in [Trellix Intrusion Prevention System 11.1.x Product Guide](/network-and-platform/docs/trellix-intrusion-prevention-system-overview-18). ### Terminology updates in the UI | **Navigation Path** | **Prior to 11.1.19.46** | **11.1.19.46 and later** | | --- | --- | --- | | **Devices** → **** → **Devices** → **** → **Setup** → **Advanced** → **L7 Data Collection** | The page includes **Flows** and **Protocols/Fields** sections and associated configuration options with one **Save** button. | The page includes two tabs - **Flows** and **Protocols**. Each tab includes a corresponding **Save** button. | | In the **Protocols/Fields** section of the page: 1. You can **Enable**, **Disable**, or **Customize** to personalize the settings for a specific protocol. 2. Click ![GUID-64007DBE-A893-4782-83D1-485E177DBBDE-low.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-70898d60-8a21-833a-3f2c-1cb54a1d7305(2).png?sv=2026-02-06&spr=https&st=2026-11-20T21%3A27%3A57Z&se=2026-11-20T22%3A27%3A57Z&sr=c&sp=r&sig=EQ8fOYtMZ8%2FXZqMN4ah777ECf4BjLHpyDKYxniKC8gM%3D) icon to view the corresponding fields of a specific protocol. All fields are enabled by default. 3. To disable a specific field for any protocol, you must first select **Customize**. | On the **Protocols** tab of the page: 1. Use the ![expand_all_button.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-24cc8678-e970-6235-13ea-2f26b889be2f(3).jpg?sv=2026-02-06&spr=https&st=2026-11-20T21%3A27%3A57Z&se=2026-11-20T22%3A27%3A57Z&sr=c&sp=r&sig=EQ8fOYtMZ8%2FXZqMN4ah777ECf4BjLHpyDKYxniKC8gM%3D) button to view or customize the associated fields of all protocols listed on the tab. All fields are collapsed by default. 2. Click ![Arrow.jpg](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-3a328c16-62bc-4cff-0bb6-536ed7d37fa4(3).jpg?sv=2026-02-06&spr=https&st=2026-11-20T21%3A27%3A57Z&se=2026-11-20T22%3A27%3A57Z&sr=c&sp=r&sig=EQ8fOYtMZ8%2FXZqMN4ah777ECf4BjLHpyDKYxniKC8gM%3D) icon to view or customize the corresponding fields of a specific protocol. All fields are enabled by default. 3. To disable a specific field for any protocol, deselect the associated check-box. |