--- title: "With SSL enabled" slug: "with-ssl-enabled" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:31Z published: 2026-10-05T15:40:31Z canonical: "docs.trellix.com/with-ssl-enabled" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # With SSL enabled ## Before you begin Before enabling SSL, perform the following steps to confirm LDAP over SSL is working in the AD server: 1. In the **Start** menu, select **Run**. 2. Type ldp.exe and press **ENTER**. You see a new window named **Ldp**. 3. Click **Connection**. The **Connect** pop-up opens. 4. Enter the Fully Qualified Domain Name (FQDN) of the AD server used to generate the certificate in the **Server** field. > [!NOTE] > Note > > If you enable SSL and use a third-party SSL certificate (for example, Verisign, Thawte, etc.), you must provide the same Fully Qualified Domain Name (FQDN) or IP address that is provided in the SSL certificate. 5. Select **SSL**. Confirm that the **Port** is 636, and then click **OK**. ## Task 1. Select **Manager** → **** → **Setup** → **GUI Access** → **LDAP Authentication**. 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-22T21%3A15%3A31Z&se=2026-11-22T22%3A15%3A31Z&sr=c&sp=r&sig=7URzyH0asjb%2FxMChIoO0o%2BRxmLrkh2IdvDvbgDg011Q%3D). The **Add an LDAP Server** page is displayed. 3. Update the following fields to complete adding a new LDAP server: | Option | Definition | | --- | --- | | **Enable LDAP Authentication?** | Select **Yes** to continue adding the LDAP server. | | **Enable SSL?** | Select the checkbox to enable SSL encryption. > [!NOTE] > Tip > > You have to import the LDAP server’s SSL certificate into the Manager keystore for authentication. To import the SSL certificate, see [Import SSL certificate](/network-and-platform/docs/import-certificate). | | **LDAP Server Name or IP Address** | Type the LDAP server IPv4 or IPv6 address. > [!NOTE] > Caution > > Only use a valid server name, since Trellix IPS does not check to see if the names are valid. A valid server name is the name of the host on which LDAP server is configured. | | **Server Port** | Type the port number between 0 and 65535. Default port is 636. | | **Test Connection** | (Optional) Click to verify that the Manager can connect to the LDAP server. | | **Save** | Click to save the changes. | | **Cancel** | Click to cancel the changes and exit. |