--- title: "Without SSL enabled" slug: "without-ssl-enabled" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:31Z published: 2026-10-05T15:40:31Z canonical: "docs.trellix.com/without-ssl-enabled" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Without SSL enabled ## Task 1. Select **Manager** → **** → **Setup** → **GUI Access** → **LDAP Authentication**. 2. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-A6ACF06E-8B7C-4F33-9335-99E4B1FDEB3D-low(2).png?sv=2026-02-06&spr=https&st=2026-11-22T21%3A07%3A07Z&se=2026-11-22T22%3A07%3A07Z&sr=c&sp=r&sig=V8OaTz4EQQckljd6anl8%2FLP3J9BsqUZskAVB%2FasfPZM%3D). The **Add an LDAP Server** page is displayed. Add an LDAP server ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-CE6B494E-4B39-407F-8200-AACA920F690A-low.png?sv=2026-02-06&spr=https&st=2026-11-22T21%3A07%3A07Z&se=2026-11-22T22%3A07%3A07Z&sr=c&sp=r&sig=V8OaTz4EQQckljd6anl8%2FLP3J9BsqUZskAVB%2FasfPZM%3D) 3. Update the following fields to complete adding a new LDAP server: | Option | Definition | | --- | --- | | **Enable LDAP Authentication?** | Select **Yes** to continue adding the LDAP server. | | **Enable SSL?** | Not applicable when not using SSL. | | **LDAP Server Name or IP Address** | Type the LDAP server IPv4 or IPv6 address. > [!NOTE] > Caution > > Only use a valid server name, since Trellix IPS does not check to see if the names are valid. A valid server name is the name of the host on which LDAP server is configured. | | **Server Port** | Type the port number between 0 and 65535. Default port is 389. | | **Test Connection** | (Optional) Click to verify that the Manager can connect to the LDAP server. | | **Save** | Click to save the changes. | | **Cancel** | Click to cancel the changes and exit. |