--- title: "Working with the Tools menu" slug: "working-with-the-tools-menu-5" tags: ["Network Security (NX)"] updated: 2026-09-11T07:21:18Z published: 2026-09-11T07:21:18Z canonical: "docs.trellix.com/working-with-the-tools-menu-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Working with the Tools menu The following topics describe how to access and use the Tools menu. - [System requirements](/network-and-platform/docs/working-with-the-tools-menu-5#system-requirements) - [Setting the tools menu password](/network-and-platform/docs/working-with-the-tools-menu-5#setting-the-tools-menu-password) - [Accessing the tools menu](/network-and-platform/docs/working-with-the-tools-menu-5#accessing-the-tools-menu) - [Disabling the tools menu](/network-and-platform/docs/working-with-the-tools-menu-5#disabling-the-tools-menu) - [Viewing tools menu information](/network-and-platform/docs/working-with-the-tools-menu-5#viewing-tools-menu-availability) ### System requirements Make sure the following requirements are met. - Model numbers and system image versions: - **Malware Analysis** Version 8.0.0 or later is running on one of the following appliance models: AX 5500, AX 5550. - **Central Management System** Version 8.1.0 or later is running on one of the following appliance models: CM 4500, CM 7500, CM 9500. - **Email Security — Server** Version 8.0.0 or later is running on one of the following appliance models: EX 3500, EX 5500, EX 8500. - **File Protect** Version 8.0.0 or later is running on the FX 6500 model. - **Endpoint Security (HX)** Version 4.0.0 or later is running on one of the following appliance models: HX 4000, HX 4400, HX 4402. - **Network Security** Version 8.0.0 or later is running on one of the following appliance models: NX 1500, NX 2500, NX 2550, NX 3500, NX 4500, NX 5500, NX 7500, NX 10450, NX 10550. - **Intelligent Virtual Execution - Server** Version 8.0.0 or later is running on one of the following appliance models: VX 5500, VX 12500. - You have access to the physical or serial console (see [Accessing the physical or serial console](/network-and-platform/docs/accessing-the-physical-or-serial-console-5) ). - The minimum system image version cited above is installed on both boot partitions on the appliance. If the appliance was not originally manufactured with that system image version, you must perform the [Upgrade steps](/network-and-platform/docs/working-with-the-tools-menu-5#upgrade-steps) to meet this requirement. - You obtained the appliance-specific preset Tools menu password from Trellix Technical Support, or you configured another password as described in [Setting or disabling the Tools menu password](/network-and-platform/docs/working-with-the-tools-menu-5#setting-the-tools-menu-password) . #### Limitations - The **Manufacture Appliance** and **Wipe Appliance Media and Manufacture Appliance** options require that the appliance was originally manufactured with a system image that supports the Tools menu. - All logging goes to the serial console. If you use the physical console to access the Tools menu, you will be unable to monitor the progress on the VGA monitor. #### Upgrade steps The minimum system image version must be installed on both boot partitions before you can access the Tools menu. Perform the steps in this section if you are upgrading from an earlier version. > [!NOTE] > Note > > These steps are not required if your appliance was originally manufactured with the minimum system image version. The minimum versions are listed in System Requirement. To enable the Tools menu if you are upgrading from an earlier release: 1. Fetch and install a supported system image: ```plaintext hostname (config) # fenet image check hostname (config) # show fenet image status hostname (config) # fenet image fetch hostname (config) # show fenet image status hostname (config) # image install ``` This installs the system image in one of the boot partitions. 2. Verify the boot partition for the new system image: ```plaintext hostname (config) # show images ``` For example, on a Network Security appliance: ```plaintext hostname (config) # show images Installed images:  Partition 1:    wmps wMPS (wMPS) 8.0.0 ...  Partition 2:    wmps wMPS (wMPS) 7.9.4 ... Last boot partition: 2 Next boot partition: 2 ``` 3. If necessary, change the `Next boot partition` so the appliance boots from the partition with the new system image when it reloads: ```plaintext hostname (config) # image boot next hostname (config) # write memory ``` 4. Reload the appliance: ```plaintext hostname (config) # reload ``` 5. Install the new system image again to put it on the other boot partition: ```plaintext hostname (config) # image install ``` 6. Change the next boot partition: ```plaintext hostname (config) # image boot next hostname (config) # write memory ``` 7. Reload the appliance: ```plaintext hostname (config) # reload ``` If you do not want to use the default Tools menu password, you can now configure one as described in [Setting the tools Menu password](/network-and-platform/docs/working-with-the-tools-menu-5#setting-the-tools-menu-password) . Users who know the password can access the Tools menu on any subsequent appliance reload, as described in [Accessing the Tools menu](/network-and-platform/docs/working-with-the-tools-menu-5#accessing-the-tools-menu) . ### Setting the Tools menu password The Tools menu requires a password. There are two options: - **Default Password**. A unique password that is derived from the appliance ID is preset on the appliance and must be obtained from Trellix Technical Support. - **Configured Password**. You can instead set another password in plain text or as a hashed string. A plain-text password is hashed before it is stored. Prerequisites - Admin access #### Setting the Tools menu password in plain text using the CLI Use the commands in this section to set the Tools menu password in plain text. To set a plain-text password: 1. Log into the appliance CLI. 2. Go to CLI configuration mode: ```plaintext hostname > enable hostame # configure terminal ``` 3. Set the password: ```plaintext hostname (config) # boot bootmgr tools password ``` 4. Save your change: ```plaintext hostname (config) # write memory ``` > [!NOTE] > Note > > Alternatively, you can use the `boot bootmgr tools password 0 <password>` command to set the password in plain text, or use the `boot bootmgr tools password` command and enter the plain-text password at the prompt. #### Example The following example sets "fyd4k8q2" as the password for the Tools menu. ```plaintext hostname (config) # boot bootmgr tools password fyd4k8q2 ``` #### Setting the Tools menu password with encryption using the CLI Use the commands in this section to set the Tools menu password with a hashed string. To set an encrypted password: 1. Log into the appliance CLI. 2. Go to CLI configuration mode: ```plaintext hostname > enable hostame # configure terminal ``` 3. Set the password: ```plaintext hostname (config) # boot bootmgr tools password 7 ``` 4. Save your change: ```plaintext hostname (config) # write memory ``` #### Example The following example sets an encrypted password for the Tools menu. ```plaintext hostname (config) # boot bootmgr tools password 7 $6$xuQN2G3r$ufK5k8dUDdpp0hPETrtjBIDZ3f3PhCxGYagp2k0gvgv/YrD88GNIkUsaKRVDMsPAyQlcGuzhRXaBpCCVPeQd1 ``` #### Restoring the default Tools menu password using the CLI Use the commands in this section to restore the default Tools menu password. You must obtain this password from Trellix Technical Support. To restore the default Tools menu password: 1. Log into the appliance CLI. 2. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 3. Restore the password: ```plaintext hostname (config) # no boot bootmgr tools password ``` 4. Save your change: ```plaintext hostname (config) # write memory ``` #### Accessing the Tools menu Use the procedure in this section to access the Tools menu. To access the Tools menu: 1. Connect to the physical or serial console as described in [Accessing the physical or serial console](/network-and-platform/docs/accessing-the-physical-or-serial-console-5) . > [!NOTE] > Note > > If you use the physical console to access the Tools menu, you will be unable to monitor the progress on the VGA monitor. 2. Log into the console using admin credentials. 3. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 4. Reload the appliance: ```plaintext hostname (config) # reload ``` 5. Pay close attention to the console as it reloads so you do not miss the `boot:` prompt. 6. When you see the `boot:` prompt, press Enter. 7. Pay close attention to the console so you do not miss a series of five periods (`.`) displayed one second apart. 8. Before the console moves past the fifth period, press any key twice. An image boot menu such as the following on a Network Security appliance is displayed. ```plaintext    Boot Menu --------------------------------------------------------------- 0: wmps wMPS (wMPS) 8.0.0... 1: wmps wMPS (wMPS) 8.0.0... 2: Tools Menu --------------------------------------------------------------- ``` 9. Press the down arrow on your keyboard to select the **2. Tools Menu** option. 10. Press **Enter**. 11. When prompted, enter the Tools menu password provided by your administrator. 12. The Tools menu (labeled "Boot Menu") is displayed. ```plaintext    Boot Menu --------------------------------------------------------------- 0: Reset admin Password 1: Wipe Appliance Media 2: Manufacture Appliance 3: Wipe Appliance Media and Manufacture Appliance 4: Return to Image Boot Menu --------------------------------------------------------------- ``` 13. Select an option (described in [Boot manager utilities](/network-and-platform/docs/boot-manager-utilities-5) ). > [!NOTE] > Note > > If you select option 4, pay attention to the console so you do not miss a series of five periods displayed one second apart, and then press any key twice to access the image boot menu. #### Example The following example from a Network Security appliance accesses the Tools menu. ```plaintext nx-03 (config) # reload Configuration changed: save changes? Configuration changes saved. Rebooting... ... boot: Booting from local disk... PXE-MOF: Exiting Intel Boot Agent. Booting default image in 3 seconds. ... This terminal is not active or input for output while booting. Booting default image in 1 seconds.    Boot Menu --------------------------------------------------------------- 0: wmps wMPS (wMPS) 8.0.0... 1: wmps wMPS (wMPS) 8.0.0... 2: Tools Menu ---------------------------------------------------------------    Use the ^ and v keys to select which entry is highlighted.    Press enter to boot the selected image or 'p' to enter a    password to unlock the next set of features.  Highlighted entry is 2: Booting: 'Tools Menu' Password: ******** .......        Boot Menu --------------------------------------------------------------- 0: Reset admin Password 1: Wipe Appliance Media 2: Manufacture Appliance 3: Wipe Appliance Media and Manufacture Appliance 4: Return to Image Boot Menu ---------------------------------------------------------------    Use the ^ and v keys to select which entry is highlighted.    Press enter to boot the selected image or 'p' to enter a    password to unlock the next set of features.  Highlighted entry is 0: ``` > [!NOTE] > Note > > The `'p'` option cited in the console instructions is not available. ### Disabling the Tools menu To prevent users from accessing the Tools menu, disable the Tools menu password. Prerequisites - Admin access #### Disabling the Tools menu using the CLI Use the commands in this section to disable the Tools menu password, which prevents users from accessing the Tools menu. To disable the Tools menu: 1. Go to CLI configuration mode: ```plaintext hostname > enable hostname # configure terminal ``` 2. Disable the password: ```plaintext hostname (config) # boot bootmgr tools disable password ``` 3. Save your change: ```plaintext hostname (config) # write memory ``` ### Viewing Tools menu availability You can view whether the Tools menu is available on the appliance. Prerequisites - Monitor, Operator, or Admin access #### Viewing Tools menu availability using the CLI Use either of the following commands to view whether users can access the Tools menu. - ```plaintext show bootvar ``` - ```plaintext show images ``` If a Tools menu password is set (either the default password or a configured password), users can access the Tools menu. If the Tools menu password is disabled, users cannot access the Tools menu. #### Examples The following example from a Network Security appliance shows that the Tools menu password is set, so users can access the Tools menu. ```plaintext nx-05 > show bootvar Installed images:  Partition 1:  wmps wMPS (wMPS) 7.4.0 xxx  Partition 2:  wmps wMPS (wMPS) 8.0.0 xxx Last boot partition: 1 Next boot partition: 1 Boot manager admin password:      undisclosed password set Boot manager tools menu password: undisclosed password set ... ``` The following example shows that the Tools menu password is disabled, so users cannot access the Tools menu. ```plaintext nx-01 > show images Installed images: ``` ```plaintext  Partition 1:  wmps wMPS (wMPS) 7.4.0 ...    Partition 2:  wmps wMPS (wMPS) 8.0.0 ... No image files are available to be installed. No image install currently in progress. Boot manager admin password:          undisclosed password set Boot manager tools menu password:     password disabled ```