--- title: "Configure TCP/IP access to the SQL Server" slug: "configure-tcp-ip-access-to-the-sql-server" tags: ["Install and Get Started", "ePolicy Orchestrator – On-prem", "ePO 5.10.x", "ePO 5.10.0"] updated: 2026-09-07T08:10:37Z published: 2026-09-07T08:10:37Z canonical: "docs.trellix.com/configure-tcp-ip-access-to-the-sql-server" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure TCP/IP access to the SQL Server ePO - On-prem can only communicate with SQL using a TCP/IP connection. Before installing ePO - On-prem, verify that the SQL Server that will host the ePO - On-prem database has TCP/IP enabled. > [!NOTE] > Note > > Make note of the port that SQL is using. 1. To configure TCP/IP protocol for the SQL Server: 1. Start **SQL Server Configuration Manager**. 2. In the console pane, expand **SQL Server Network Configuration**, and select the Protocols item for your SQL instance. For example, if you are using the default MSSQLSERVER instance, select **Protocols for MSSQLSERVER**. 3. In the details pane, locate the entry for **TCP/IP** and check the **Status** column. If it's set to **Enabled**, go to step 2 to determine the port being used. 4. If TCP/IP is set to **Disabled**, double-click **TCP/IP** to open the **TCP/IP Properties** window. 5. Select the **Protocol** tab, click **Enabled**, and select **Yes**. 6. Click **Apply** and then **OK** to close the **Warning** dialog. TCP/IP is enabled. You can now restart the service to make sure that your changes take effect. 7. In the console pane, click **SQL Server Services**. 8. In the details pane, right-click the SQL Server service and click **Restart**. 2. To determine the port being used by SQL: 1. If needed, start **SQL Server Configuration Manager**, expand **SQL Server Network Configuration**, and select the Protocols item for your SQL instance. 2. Double-click **TCP/IP** to open the **TCP/IP Properties** window. 3. Select the **IP Addresses** tab. Make sure **Enabled** is set to **Yes** for each active IP address. 4. Under **IPAII**, make note of the value for **TCP Dynamic Ports**. If there is a value specified, for example `57482`, your SQL Server is using dynamic ports. Make a note of the value because this information might be needed later in the installation. > [!NOTE] > Note > > If you are using dynamic ports, the SQL Browser service must be running on the SQL Server. If the value for **TCP Dynamic Ports** is blank, then your SQL Server is using a static port and the value for this port will be shown in the **TCP Port** field. 3. If you are using dynamic ports, make a note of the SQL instance name that will host the ePO - On-prem database. If you are using the default instance for SQL, the instance name is MSSQLSERVER.