--- title: "Configure the EDR Telemetry Store cluster" slug: "configure-the-edr-telemetry-store-cluster" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-25T15:19:06Z published: 2026-08-26T19:31:36Z canonical: "docs.trellix.com/configure-the-edr-telemetry-store-cluster" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Configure the EDR Telemetry Store cluster In this section, you create the EDR Telemetry Store configuration file using the setup wizard and then deploy the cluster. The wizard prompts you to configure the following: - Cluster name and basic settings - Trellix ePO server details (required) - DNS subdomain for endpoints (required) - Node configuration and roles - Index management policies The setup wizard automatically configures the following security settings: - **SSL/TLS certificates**: Auto-generates certificates using Mutual Transport Layer Security (mTLS). - **Cluster security settings**: Enforces authentication using mandatory mTLS. 1. Start the **OpenSearch Cluster Setup Wizard**. ``` enable configure opensearch cluster setup ``` 2. Configure the cluster settings in the wizard as follows: At each prompt, enter the required value. To accept a listed default value, press **Enter**. To exit the cluster setup, type `q` and press **Enter**. - **Cluster name**: Enter a cluster name. Default value: `Trellix-trace-store` - **Number of nodes**: Enter the number of nodes in the cluster. Default value: `3` > [!NOTE] > Note > > For the single-node configuration, enter `1`. > > For more information about different node roles in a multi-node cluster, see [EDR Telemetry Store node roles](/v1/docs/configure-edr-telemetry-store-node-roles). - **Timezone**: Select the timezone. Default value: `UTC` - **HTTP Port**: Enter the HTTP port number. Default value: `9200` - **Transport Port**: Enter the transport port number. Default value: `9300` - **Number of ePO servers**: Enter the number of ePO servers. Default value: `1` - **IP address or Hostname of ePO servers**: Enter the IP address or hostname of your ePO Trellix server. - **ePO server console port**: Enter the port number for the ePO console. Default value: `8443` - **ePO server username** and **password**: Enter the ePO server credentials. - **DNS subdomain**: Enter the DNS subdomain. For example, `domain.com` ![2-OpenSearch-ClusterConfiguration.png](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-127ff47b-1c8a-51f3-7fbe-035e3b973934.png?sv=2026-02-06&spr=https&st=2026-11-19T21%3A40%3A32Z&se=2026-11-19T22%3A40%3A32Z&sr=c&sp=r&sig=xbIE5oXYjP1q6rsUvuvkwvAmCwKmsjRP3YgY%2FE5tuTY%3D)