--- title: "Enable and disable indicator rule aging using the Web UI" slug: "enable-and-disable-indicator-rule-aging-using-the-web-ui" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:16Z published: 2026-08-26T19:31:16Z canonical: "docs.trellix.com/enable-and-disable-indicator-rule-aging-using-the-web-ui" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable and disable indicator rule aging using the Web UI **To enable or disable indicator rule aging using the Web UI:** 1. Log in to the Endpoint Security (HX) Web UI. 2. Select **Aging Settings** on the **Configure** menu. The Aging Settings page appears. 3. To enable or disable the indicator rule aging using the Web UI: 1. To enable the indicator rule, specify an aging interval in the **Delete indicator when it's had no alerts for**: box in the Indicator and Alert box on the **Aging Settings** page. Valid values range from 1 through 365 days. This sets and enables the aging interval. 2. To disable the indicator rule, select the **No auto-deletion; I will delete indicator rules manually** option in the Indicator and Alert box on the **Aging Settings** page 4. Click **Save** to save your changes. > [!NOTE] > Note > > To restore default settings, click **Reset to default**, and then click **Save**. If you click **Cancel**, Endpoint Security (HX) will return settings to the most recently saved values.