--- title: "Enable FIPS mode on Endpoint Security (HX)" slug: "enable-fips-mode-on-endpoint-security-hx" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:09Z published: 2026-08-26T19:31:09Z canonical: "docs.trellix.com/enable-fips-mode-on-endpoint-security-hx" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Enable FIPS mode on Endpoint Security (HX) Configure the Endpoint Security (HX) server to operate in Federal Information Processing Standard (FIPS) 140-3 compliance mode using the command-line interface (CLI). This process requires a system reboot to apply the security standards. Follow these steps to enable FIPS mode on the Endpoint Security (HX) server: 1. Connect to the Endpoint Security (HX) server using an SSH client. 2. Enter privileged mode. ``` enable ``` 3. Enter configuration mode. ``` configure terminal ``` 4. Apply the FIPS 140-3 compliance standard. ``` compliance apply standard fips ``` 5. Save the configuration. ``` write memory ``` 6. Reboot the server to apply the changes. ``` reload ``` 7. After the server restarts, verify the compliance status. ``` show compliance standard fips ```