--- title: "Modifying the host description in the containment allow list using the CLI" slug: "modifying-the-host-description-in-the-containment-allow-list-using-the-cli" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:23Z published: 2026-08-26T19:31:23Z canonical: "docs.trellix.com/modifying-the-host-description-in-the-containment-allow-list-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Modifying the host description in the containment allow list using the CLI You can change the host description by entering a new description for an existing host listed in the allow list. **To modify the host description in the containment allow list:** ``` hostname (config) # hx server containment whitelist description ``` 1. Enable the CLI configuration mode: ``` hostname > enable hostname # configure terminal ``` 2. Modify the host description. Enclose descriptions that are longer than one word in quotation marks ("). 3. Save your settings. ``` hostname (config) # write mem ``` > [!NOTE] > Note > > To list the hosts currently on the allow list, enter this command: > > `hostname (config) # show hx server containment` ### Examples The following example changes a host description in the containment allow list to a single word: ``` hostname (config) # hx server containment whitelist testserverhost description testserver                   ``` The following example changes a host description in the containment whitelist to a string of words: ``` hostname (config) # hx server containment whitelist 123.45.6.7 description “The Group A Test Appliance”                   ```