--- title: "Review indicator and alert aging settings using the CLI" slug: "review-indicator-and-alert-aging-settings-using-the-cli" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:02Z published: 2026-08-26T19:31:02Z canonical: "docs.trellix.com/review-indicator-and-alert-aging-settings-using-the-cli" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Review indicator and alert aging settings using the CLI **To review indicator and alert aging settings using the CLI:** 1. Enable the CLI configuration mode: `hostname > enable` `hostname # configure terminal` 2. List indicator rule and alert aging settings: `hostname (config) # show hx server detection` The following is sample output from this command: `HX Server Detection Configuration: Generated Indicator Aging: enabled Generated Indicator Aging Period: 14 days Generated Condition Aging: enabled Generated Condition Aging Period: 30 days Source Alert Aging: enabled Source Alert Aging Period: 30 days Alert Aging Period: 30 days False Positive Alert Aging Period: 1 day Intel Matching: enabled Legacy notification listener active: no Malicious.URL Indicator Generation (legacy): yes Suspicious (noisy) Indicator Generation (legacy): no Inbound alert poll interval: 5 minutes Inbound alert minimum severity: majr No ignored alert types. Last bookmark ID: 0`