--- title: "Specify timestamp settings" slug: "specify-timestamp-settings" tags: ["EDR with Forensics (EDRF)", "Endpoint Security"] updated: 2026-08-26T19:31:23Z published: 2026-08-26T19:31:23Z canonical: "docs.trellix.com/specify-timestamp-settings" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Specify timestamp settings You can use the Timestamp Settings tab on the Automatic Triage Settings page to specify the length of time before and after the timestamp during which information is collected. The timestamp is the time when the event that triggered the alert occurred. **To specify timestamp settings:** 1. Log in to the Endpoint Security (HX) Web UI. 2. From the **Configure** section of the main menu, select **Triage Settings**. 3. On the **Automatic Triage Settings** page, click the **Timestamp Settings** tab. 4. On the **Timestamp Settings** page, specify the length of time before and after the timestamp during which information is collected. 5. In the upper box of the **Timestamp Settings** page, enter the number of seconds before the specified timestamp during which information should be collected. 6. In the lower box of the **Timestamp Settings** page, enter the number of seconds after the timestamp during which information should be collected. 7. Click **Save** to save your settings. > [!NOTE] > Note > > You can change all values on the page back to the default settings by clicking **Reset to Defaults**, and clicking **Save**.