datapathstat

Prev Next

This command shows datapath statistics and details for all parameters. You can enter a single parameter to fetch the details.

Syntax:

datapath core <core_number|all> parameter <param|all>

Parameter

Description

core_number

can be a value between 0 - 31

param: The possible values for the

parameter option are listed below.

datapath-cache-errors

datapath cache errors

dp-rx-fcs-error-cnt

dp recv fcs error count

dp-tx-fcs-error-cnt

dp sent fcs error count

fifo-dumm

fifo dumm

fifo-inuse-or-double-rx-free-errors

fifo in use or double recd free errors

fifo-inuse-or-double-tx-free-errors

fifo in use or double sent free errors

free-fifo

free fifo

free-tx-buf

free sent buffer

get-rx-buf-failed

get recd buffer failed

get-tx-buf

get sent buffer

get-tx-buf-failed

get sent buffer failed

ip-checksum-err-pkt-count

ip checksum err pkt count

rx-bad

bad recd

rx-buf-added

recd buffer added

rx-bytes

bytes recd

rx-cnt

recd count

rx-descriptors-avail

recd descriptors avail

rx-empty

empty recd

rx-frames

frames recd

rx-high-watermark-cnt

recd high watermark count

rx-low-watermark-cnt

recd low watermark count

rx-retry

retry recd

rx-too-big

too big recd

sensor-load

display Sensor load

tcp-checksum-err-pkt-count

tcp checksum err pkt count

tx-bytes

bytes sent

tx-cnt

sent count

tx-done

sent done

tx-frames

frames sent

tx-full-cnt

sent full count

tx-pending-cnt

sent pending count

udp-checksum-err-pkt-count

udp checksum err pkt count

Sample Output:

IntruDbg#> datapath core all parameter all

core 1

Tx frames: 0

Tx bytes: 0

Rx frames: 0

Rx bytes: 0

Rx bad: 0

Rx empty: 0

Rx retry: 0

Rx too big: 0

free fifo: 0

IP checksum err pkt count: 0

TCP checksum err pkt count: 0

UDP checksum err pkt count: 0

rx descriptors avail: 0

rx low watermark cnt: 0

rx high watermark cnt: 0

free tx buf: 0

tx done: 0

get tx buf: 0

get tx buf failed: 0

get rx buf failed: 0

tx dcnt: 0

rx dcnt: 0

rx buf added: 0

datapath cache errors: 0

fifo dumm: 0

Tx full cnt: 0

Tx pending cnt: 0

Fifo inuse/double Tx free errors: 0

Fifo inuse/double Rx free errors: 0

dp-rx-fcs-error-cnt: 0

dp-tx-fcs-error-cnt: 0

sensor-load: 0

Applicable to:

NS-series Sensors