datapathstat intfport

Prev Next

This command displays the datapath statistics and the details of all the parameters for an interface port. You can also enter a single parameter to fetch the details.

Syntax:

datapathstat intfport <id> core <core_number|all> parameter <param|all>

Parameter

Description

id

Valid interface port ID

core_number

Valid core number that is a numeric value in a range specific to the Sensor model

param: The possible values for the parameter option are listed below.

  • tx-frames

Frames sent

  • tx-bytes

Bytes sent

Frames received

  • rx-frames

  • rx-bytes

Bytes received

  • ip-checksum-err-pkt-count

Total number of checksum error packets in IP traffic

  • tcp-checksum-err-pkt-count

Total number of checksum error packets in TCP traffic

  • udp-checksum-err-pkt-count

Total number of checksum error packets in UDP traffic

  • rx-count

Data path packet count received

Sample Output:

IntruDbg#> datapathstat intfport g3/8 core 1 parameter all

Datapath:

DP 0

DP 1

DP 2

DP 3

DP 4

DP 5

core 1

Tx frames:

0

0

0

0

0

0

Tx bytes

0

0

0

0

0

0

Rx frames:

0

0

0

0

0

0

Rx bytes:

0

0

0

0

0

0

IP checksum err pkt count:

0

0

0

0

0

0

TCP checksum err pkt count:

0

0

0

0

0

0

UDP checksum err pkt count:

0

0

0

0

0

0

rx count:

0

0

0

0

0

0

Applicable to:

NS-series and Virtual IPS Sensors