This command shows datapath statistics and details for all parameters. You can enter a single parameter to fetch the details.
Syntax:
datapath core <core_number|all> parameter <param|all>
Parameter | Description | |
|---|---|---|
core_number | can be a value between 0 - 31 | |
param: The possible values for the parameter option are listed below. | ||
datapath-cache-errors | datapath cache errors | |
dp-rx-fcs-error-cnt | dp recv fcs error count | |
dp-tx-fcs-error-cnt | dp sent fcs error count | |
fifo-dumm | fifo dumm | |
fifo-inuse-or-double-rx-free-errors | fifo in use or double recd free errors | |
fifo-inuse-or-double-tx-free-errors | fifo in use or double sent free errors | |
free-fifo | free fifo | |
free-tx-buf | free sent buffer | |
get-rx-buf-failed | get recd buffer failed | |
get-tx-buf | get sent buffer | |
get-tx-buf-failed | get sent buffer failed | |
ip-checksum-err-pkt-count | ip checksum err pkt count | |
rx-bad | bad recd | |
rx-buf-added | recd buffer added | |
rx-bytes | bytes recd | |
rx-cnt | recd count | |
rx-descriptors-avail | recd descriptors avail | |
rx-empty | empty recd | |
rx-frames | frames recd | |
rx-high-watermark-cnt | recd high watermark count | |
rx-low-watermark-cnt | recd low watermark count | |
rx-retry | retry recd | |
rx-too-big | too big recd | |
sensor-load | display Sensor load | |
tcp-checksum-err-pkt-count | tcp checksum err pkt count | |
tx-bytes | bytes sent | |
tx-cnt | sent count | |
tx-done | sent done | |
tx-frames | frames sent | |
tx-full-cnt | sent full count | |
tx-pending-cnt | sent pending count | |
udp-checksum-err-pkt-count | udp checksum err pkt count | |
Sample Output:
IntruDbg#> datapath core all parameter all
core 1
Tx frames: 0
Tx bytes: 0
Rx frames: 0
Rx bytes: 0
Rx bad: 0
Rx empty: 0
Rx retry: 0
Rx too big: 0
free fifo: 0
IP checksum err pkt count: 0
TCP checksum err pkt count: 0
UDP checksum err pkt count: 0
rx descriptors avail: 0
rx low watermark cnt: 0
rx high watermark cnt: 0
free tx buf: 0
tx done: 0
get tx buf: 0
get tx buf failed: 0
get rx buf failed: 0
tx dcnt: 0
rx dcnt: 0
rx buf added: 0
datapath cache errors: 0
fifo dumm: 0
Tx full cnt: 0
Tx pending cnt: 0
Fifo inuse/double Tx free errors: 0
Fifo inuse/double Rx free errors: 0
dp-rx-fcs-error-cnt: 0
dp-tx-fcs-error-cnt: 0
sensor-load: 0
Applicable to:
NS-series Sensors