datapathstat intfport

This command displays the datapath statistics and the details of all the parameters for an interface port. You can also enter a single parameter to fetch the details.

Syntax:

datapathstat intfport <id> core <core_number|all> parameter <param|all>

Parameter	Description
id	Valid interface port ID
core_number	Valid core number that is a numeric value in a range specific to the Sensor model
param: The possible values for the parameter option are listed below.
tx-frames	Frames sent
tx-bytes	Bytes sent
	Frames received
rx-frames rx-bytes	Bytes received
ip-checksum-err-pkt-count	Total number of checksum error packets in IP traffic
tcp-checksum-err-pkt-count	Total number of checksum error packets in TCP traffic
udp-checksum-err-pkt-count	Total number of checksum error packets in UDP traffic
rx-count	Data path packet count received

Sample Output:

IntruDbg#> datapathstat intfport g3/8 core 1 parameter all

	`Datapath:`	`DP 0`	`DP 1`	`DP 2`	`DP 3`	`DP 4`	`DP 5`
`core 1`	`Tx frames:`	`0`	`0`	`0`	`0`	`0`	`0`
	`Tx bytes`	`0`	`0`	`0`	`0`	`0`	`0`
	`Rx frames:`	`0`	`0`	`0`	`0`	`0`	`0`
	`Rx bytes:`	`0`	`0`	`0`	`0`	`0`	`0`
	`IP checksum err pkt count:`	`0`	`0`	`0`	`0`	`0`	`0`
	`TCP checksum err pkt count:`	`0`	`0`	`0`	`0`	`0`	`0`
	`UDP checksum err pkt count:`	`0`	`0`	`0`	`0`	`0`	`0`
	`rx count:`	`0`	`0`	`0`	`0`	`0`	`0`

Applicable to:

NS-series and Virtual IPS Sensors