You can add S3 on-prem storages in the appliance via the CLI.
Follow the steps below to manage S3 on-prem storages:
Create an S3 on-prem storage
In S3 on-prem storage, each storage is specific to a single bucket.
Log in to the File Protect appliance Web UI.
Go to the Storage page.
Click Add Storage on the top-right of the table.
Enter the following details in the form that appears on the left:
Storage Type as S3 On-Prem
Storage Name
App type as S3
Bucket name
Region
Quarantine Bucket
Good Bucket
Type of Share as Files
.png?sv=2026-02-06&spr=https&st=2026-11-20T08%3A36%3A11Z&se=2026-11-20T08%3A50%3A11Z&sr=c&sp=r&sig=MQz%2FnwVUPa4Tm%2FL%2B%2F5km0ZdCaKzRRe%2FNVBgk0y4AA4Q%3D)
Click Configure Storage to save your storage settings.
Enable the CLI configuration mode.
hostname > enable hostname # configure terminal
Enter a unique name for the S3 on-prem storage along with the bucket name and region of the storage.
hostname (config) # fmps storage create s3-onprem name <S3StorageName> apps3bucket <BucketName> region <RegionName>
Save your changes.
hostname (config) # write memoryView all the S3 on-prem configured storages.
hostname (config) # show fmps storage type s3-onprem Storage type: s3-onprem Name: test-dev-1 Share Type: Source App: s3 Status: On-prem S3 is connected Bucket Name: dev-buck-1 Region: us-east-1 Quarantine Bucket: Not set Good Bucket: Not set
Configure file locations for S3 on-prem storage
It is mandatory to configure the quarantine and good buckets before starting a scan.
Note
Unknown and whitelist target locations are not supported in S3 on-prem storages. The File Protect appliance will move the unknown and skipped files to the good bucket.
Enable the CLI configuration mode.
hostname > enable hostname # configure terminal
Enter the name of the S3 on-prem storage and the locations for quarantine and good files.
hostname (config) # fmps storage configure s3-onprem <S3StorageName> quarantine <LocationForQuarantinedFiles> good <LocationForGoodFiles>
Save your changes.
hostname (config) # write memory
Delete an S3 on-prem storage
Enable the CLI configuration mode.
hostname > enable hostname # configure terminal
View all the configured storages.
hostname # show fmps storage all Storage type: aws Name: MyAWSStorage Share Type: Source App: s3 Status: AWS configured and connect Bucket Name: aws-bucket-name Queue Name: aws-queue-name Region: aws-region-nameStorage type: s3 Name: test-S3-1 Share Type: Source App: s3 Status: On-prem S3 is connected Bucket Name: dev-buck-1 Region: us-east-1 Quarantine Bucket: qa-quar-buck Good Bucket: qa-good-buck
Storage type: o365 Name: MySharePointStorage Share Type: Source App: sharepoint Quarantine Site: quarantine_site Status: Office 365 configured and connected
Specify the storage to delete. In this example, test-S3-1 is deleted.
hostname (config) # fmps storage delete name test-S3-1 Storage operation completed successfullyVerify that the former configured storage was deleted.
hostname (config) # show fmps storage name test-S3-1 hostname (config) #hostname # show fmps storage all Storage type: aws Name: MyAWSStorage Share Type: Source App: s3 Status: AWS configured and connect Bucket Name: aws-bucket-name Queue Name: aws-queue-name Region: aws-region-nameStorage type: o365 Name: MySharePointStorage Share Type: Source App: sharepoint Quarantine Site: quarantine_site Status: Office 365 configured and connected
Save your changes.
hostname (config) # write memory