rescuedisk

Prev Next

The rescuedisk command must be executed only during an actual Sensor rescue procedure. This command reformats the SSD and loads a Sensor image of this (WORD) version from the internal flash device onto the SSD. This will be the next bootable image.

Caution

Do not execute this command when the Sensor is in good health.

Syntax:

rescuedisk <rescue image>

Note

You can find the rescue images using show rescueimages command.

Sample Output:

WARNING ... THIS COMMAND WILL REFORMAT YOUR SSD ..?

Please enter Y to confirm:

Applicable to:

NS-series Sensors